stm32h7 ADC+DMA 遇到的问题-花开不语的回答

stm32h7 ADC+DMA 遇到的问题

2019-07-20 00:28发布

问题如下：ADC采集多通道信号时，请求DMA，发现自己定义的ADC_ConvertedValue[4]里面没有值，代码如下：
adc.h
#ifndef __ADC_H
#define __ADC_H
#include "sys.h"
extern __IO float ADC_ConvertedValueLocal[3];
extern uint32_t ADC_ConvertedValue[3];
extern uint32_t ADC_ConvertedValueRead[6];
extern uint32_t DMA_Transfer_Complete_Count;
extern ADC_HandleTypeDef hadcx;
extern DMA_HandleTypeDef hdma_adcx;
void MYDMA_Config(DMA_Stream_TypeDef *DMA_Streamx);
void MY_ADC_Init(void); //ADCí¨μà3õê¼»ˉ
u16 Get_Adc(u32 ch);
#endif
main.c
#include "sys.h"
#include "delay.h"
#include "usart.h"
#include "led.h"
#include "key.h"
#include "lcd.h"
#include "sdram.h"
#include "usmart.h"
#include "adc.h"
#define ADC_CONVERTED_DATA_BUFFER_SIZE
/************************************************
************************************************/

__IO float ADC_ConvertedValueLocal[3];//×îÖÕ×a»»μÄμçÑ1Öμ
uint32_t ADC_ConvertedValue[3];//μçÑ1μÄÔ-ê¼Öμ
uint32_t ADC_ConvertedValueRead[6];//ADC_DMA′æ′￠Çø
uint32_t DMA_Transfer_Complete_Count=0;//2aêÔADC_DMAÖD¶Ïíê3é′Îêy
int main(void)
{

Cache_Enable();             //′ò¿aL1-Cache
HAL_Init();             //3õê¼»ˉHAL¿a
Stm32_Clock_Init(160,5,2,4);          //éèÖÃê±Öó,400Mhz
delay_init(400); //Ñóê±3õê¼»ˉ
uart_init(115200); //′®¿ú3õê¼»ˉ
usmart_dev.init(200);         //3õê¼»ˉUSMART
LED_Init(); //3õê¼»ˉLED
KEY_Init(); //3õê¼»ˉ°′¼ü
SDRAM_Init();                //3õê¼»ˉSDRAM
LCD_Init(); //3õê¼»ˉLCD
MY_ADC_Init();
MYDMA_Config(DMA2_Stream0);

POINT_COLOR=RED;
LCD_ShowString(30,50,200,16,16,"Apollo STM32F4/F7");
LCD_ShowString(30,70,200,16,16,"ADC TEST");
LCD_ShowString(30,90,200,16,16,"ATOM@ALIENTEK");
LCD_ShowString(30,110,200,16,16,"2016/7/12");
POINT_COLOR=BLUE;//éèÖÃ×ÖìåÎaà¶é«
LCD_ShowString(30,130,200,16,16,"ADC1_CH15_VAL:");
LCD_ShowString(30,150,200,16,16,"ADC1_CH15_VOL:0.000V"); //ÏèÔú1ì¶¨Î»ÖÃÏÔê¾D¡êyμã
while(1)
{
delay_ms(500);

LCD_ShowxNum(142,130,ADC_ConvertedValue[1],5,16,0); //检测ADC_ConvertedValue[1]有数据

ADC_ConvertedValueLocal[0] =(ADC_ConvertedValue[0]&0xFFF)*3.3/65536;
   ADC_ConvertedValueLocal[1] =(ADC_ConvertedValue[1]&0xFFF)*3.3/65536;
ADC_ConvertedValueLocal[2] =(ADC_ConvertedValue[2]&0xFFF)*3.3/65536;

   printf("CH15_PA3 value = %d -> %fV ",ADC_ConvertedValue[0]&0xFFF,ADC_ConvertedValueLocal[0]);
printf("CH18_PA4 value = %d -> %fV ",ADC_ConvertedValue[1]&0xFFF,ADC_ConvertedValueLocal[1]);
printf("CH19_PA5 value = %d -> %fV ",ADC_ConvertedValue[2]&0xFFF,ADC_ConvertedValueLocal[2]);

printf("òÑ¾-íê3éAD×a»»′Îêy￡o%d ",DMA_Transfer_Complete_Count);
DMA_Transfer_Complete_Count=0;

printf(" ");

}
}
adc.c
#include "adc.h"
#include "delay.h"

ADC_HandleTypeDef hadcx;
ADC_ChannelConfTypeDef hadcx_ChanConf;
DMA_HandleTypeDef hdma_adcx;
void DMA_Config(void);

void MY_ADC_Init(void)
{
  hadcx.Instance = ADC1;
hadcx.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
hadcx.Init.Resolution = ADC_RESOLUTION_12B;
  hadcx.Init.ScanConvMode = ENABLE;
hadcx.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
hadcx.Init.LowPowerAutoWait=DISABLE;
  hadcx.Init.ContinuousConvMode = ENABLE;
hadcx.Init.NbrOfConversion = 3;
  hadcx.Init.DiscontinuousConvMode = DISABLE;
hadcx.Init.NbrOfDiscConversion=0;
  hadcx.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadcx.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadcx.Init.BoostMode=ENABLE;
hadcx.Init.Overrun=ADC_OVR_DATA_OVERWRITTEN;
  hadcx.Init.OversamplingMode=DISABLE;
  hadcx.Init.ConversionDataManagement=ADC_CONVERSIONDATA_DR;
HAL_ADCEx_Calibration_Start(&hadcx ,ADC_CALIB_OFFSET,ADC_SINGLE_ENDED);

hadcx_ChanConf.Channel = ADC_CHANNEL_15;
hadcx_ChanConf.Rank = ADC_REGULAR_RANK_1;
hadcx_ChanConf.SamplingTime = ADC_SAMPLETIME_64CYCLES_5;
   hadcx_ChanConf.SingleDiff = ADC_SINGLE_ENDED;
hadcx_ChanConf.OffsetNumber = ADC_OFFSET_NONE;
hadcx_ChanConf.Offset = 0;
HAL_ADC_ConfigChannel(&hadcx,&hadcx_ChanConf);
hadcx_ChanConf.Channel = ADC_CHANNEL_18;
hadcx_ChanConf.Rank = ADC_REGULAR_RANK_2;
hadcx_ChanConf.SamplingTime = ADC_SAMPLETIME_64CYCLES_5;
   hadcx_ChanConf.SingleDiff = ADC_SINGLE_ENDED;
hadcx_ChanConf.OffsetNumber = ADC_OFFSET_NONE;
hadcx_ChanConf.Offset = 0;
HAL_ADC_ConfigChannel(&hadcx,&hadcx_ChanConf);
hadcx_ChanConf.Channel = ADC_CHANNEL_19;
hadcx_ChanConf.Rank = ADC_REGULAR_RANK_3;
hadcx_ChanConf.SamplingTime = ADC_SAMPLETIME_64CYCLES_5;
   hadcx_ChanConf.SingleDiff = ADC_SINGLE_ENDED;
hadcx_ChanConf.OffsetNumber = ADC_OFFSET_NONE;
hadcx_ChanConf.Offset = 0;
HAL_ADC_ConfigChannel(&hadcx,&hadcx_ChanConf);

}

void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{
GPIO_InitTypeDef GPIO_Initure;
__HAL_RCC_ADC12_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_ADC_CONFIG(RCC_ADCCLKSOURCE_CLKP);

GPIO_Initure.Pin=GPIO_PIN_3;
GPIO_Initure.Mode=GPIO_MODE_ANALOG;
GPIO_Initure.Pull=GPIO_NOPULL;
HAL_GPIO_Init(GPIOA,&GPIO_Initure);
   GPIO_Initure.Pin=GPIO_PIN_4;
GPIO_Initure.Mode=GPIO_MODE_ANALOG;
GPIO_Initure.Pull=GPIO_NOPULL;
HAL_GPIO_Init(GPIOA,&GPIO_Initure);
   GPIO_Initure.Pin=GPIO_PIN_5;          //PA5
GPIO_Initure.Mode=GPIO_MODE_ANALOG;
GPIO_Initure.Pull=GPIO_NOPULL;
HAL_GPIO_Init(GPIOA,&GPIO_Initure);
}
u16 Get_Adc(u32 ch)
{

HAL_ADC_Start_DMA(&hadcx, (uint32_t *)&ADC_ConvertedValue[0],3);
   HAL_ADC_ConvCpltCallback(&hadcx);
   HAL_ADC_Stop_DMA(&hadcx);

}

void MYDMA_Config(DMA_Stream_TypeDef *DMA_Streamx)
{
   if((u32)DMA_Streamx>(u32)DMA2)
{
      __HAL_RCC_DMA2_CLK_ENABLE();
}else
{
      __HAL_RCC_DMA1_CLK_ENABLE();
}

   hdma_adcx.Instance=DMA_Streamx;
   hdma_adcx.Init.Request = DMA_REQUEST_ADC1;
   hdma_adcx.Init.Direction=DMA_PERIPH_TO_MEMORY;
   hdma_adcx.Init.PeriphInc=DMA_PINC_DISABLE;
   hdma_adcx.Init.MemInc=DMA_MINC_ENABLE;
   hdma_adcx.Init.PeriphDataAlignment=DMA_PDATAALIGN_HALFWORD;
   hdma_adcx.Init.MemDataAlignment=DMA_MDATAALIGN_HALFWORD;
   hdma_adcx.Init.Mode=DMA_CIRCULAR;
   hdma_adcx.Init.Priority=DMA_PRIORITY_HIGH;
   hdma_adcx.Init.FIFOMode=DMA_FIFOMODE_DISABLE;
   hdma_adcx.Init.FIFOThreshold=DMA_FIFO_THRESHOLD_FULL;
   hdma_adcx.Init.MemBurst=DMA_MBURST_SINGLE;
   hdma_adcx.Init.PeriphBurst=DMA_PBURST_SINGLE;

   HAL_DMA_DeInit(&hdma_adcx);
   HAL_DMA_Init(&hdma_adcx);

   __HAL_LINKDMA(&hadcx,DMA_Handle,hdma_adcx);

}
遇到的问题就是ADC_ConvertedValue[]里没有数据，其中语句是HAL_ADC_Start_DMA(&hadcx, (uint32_t *)&ADC_ConvertedValue[0],3);

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。

9条回答

花开不语

2019-07-20 00:32

做出来了，说到底还是配置问题。h7在dma这一块的配置不同于F7/4，只要按照cube官方例程（STM32CubeH7_V1.3.0 ）可以参考一下，改一下就可以用。E:STM32H743STM32CubeH7_V1.3.0STM32Cube_FW_H7_V1.3.0ProjectsSTM32H743ZI-NucleoExamplesADCADC_DMA_TransferMDK-ARM,没有啥目标地址对不对齐这一说法，在这里十分得的感谢帮助我的一个陌生人（ alvad），问了好多人，大多数人都不回应，只有他帮助了我，感觉世界上还是好人多，希望大家不要那么冷落，也许就是你的一句话，就可以帮助我这种新手不用花一个多月时间解决不了的问题