彩屏显示单 {MOD}就可以，显示渐变 {MOD}就不行-hexixiaomao的回答

彩屏显示单 {MOD}就可以，显示渐变 {MOD}就不行

2020-02-04 09:04发布

站内问答 / 51单片机

4049 7

2.6寸的彩屏，芯片ili9320，显示彩条或单 {MOD}的图片都可以，就是显示渐变的图片不行，显示渐变 {MOD}时，红 {MOD}好像正常，绿 {MOD}和蓝 {MOD}有很多洋红 {MOD}在里面，附上寄存器设置，请大家给看看问题出在哪了？
LCD_Write_COM(0x00,0xE5);LCD_Write_DATA(0x08,0x00);
               LCD_Write_COM(0x00,0x00); LCD_Write_DATA(0x00,0x01);
               delayms(100);

LCD_Write_COM(0x00,0x01); LCD_Write_DATA(0x01,0x00);
LCD_Write_COM(0x00,0x02); LCD_Write_DATA(0x07,0x00);
LCD_Write_COM(0x00,0x03); LCD_Write_DATA(0x10,0x30);
LCD_Write_COM(0x00,0x04); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x08); LCD_Write_DATA(0x02,0x02);
LCD_Write_COM(0x00,0x09); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x0A); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x0C); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x0D); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x0F); LCD_Write_DATA(0x00,0x00);
//*************Power On sequence ****************//
LCD_Write_COM(0x00,0x10); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x11); LCD_Write_DATA(0x00,0x07);
LCD_Write_COM(0x00,0x12); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x13); LCD_Write_DATA(0x00,0x00);
delayms(200);

LCD_Write_COM(0x00,0x10); LCD_Write_DATA(0x17,0xb0);
LCD_Write_COM(0x00,0x11); LCD_Write_DATA(0x01,0x37);
delayms(50);
LCD_Write_COM(0x00,0x12); LCD_Write_DATA(0x01,0x3b);
delayms(50);
LCD_Write_COM(0x00,0x13); LCD_Write_DATA(0x0e,0x00);
LCD_Write_COM(0x00,0x29); LCD_Write_DATA(0x00,0x09);
delayms(50);

LCD_Write_COM(0x00,0x20); LCD_Write_DATA(0x00,0x00);
               LCD_Write_COM(0x00,0x21); LCD_Write_DATA(0x00,0x00);

// ----------- Adjust the Gamma Curve ----------//
LCD_Write_COM(0x00,0x30); LCD_Write_DATA(0x03,0x07);
delayms(50);
LCD_Write_COM(0x00,0x31); LCD_Write_DATA(0x05,0x07);
LCD_Write_COM(0x00,0x32); LCD_Write_DATA(0x05,0x00);
LCD_Write_COM(0x00,0x35); LCD_Write_DATA(0x03,0x04);
LCD_Write_COM(0x00,0x36); LCD_Write_DATA(0x00,0x07);
LCD_Write_COM(0x00,0x37); LCD_Write_DATA(0x07,0x07);
LCD_Write_COM(0x00,0x38); LCD_Write_DATA(0x00,0x07);
LCD_Write_COM(0x00,0x39); LCD_Write_DATA(0x00,0x07);
LCD_Write_COM(0x00,0x3C); LCD_Write_DATA(0x06,0x00);
LCD_Write_COM(0x00,0x3D); LCD_Write_DATA(0x07,0x00);
delayms(5);

//------------------ Set GRAM area ---------------//
LCD_Write_COM(0x00,0x50); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x51); LCD_Write_DATA(0x00,0xEF);
LCD_Write_COM(0x00,0x52); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x53); LCD_Write_DATA(0x01,0x3F);
LCD_Write_COM(0x00,0x60); LCD_Write_DATA(0x36,0x00);
LCD_Write_COM(0x00,0x61); LCD_Write_DATA(0x00,0x01);
LCD_Write_COM(0x00,0x6A); LCD_Write_DATA(0x00,0x00);

//-------------- Partial Display Control ---------//
LCD_Write_COM(0x00,0x80); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x81); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x82); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x83); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x84); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x85); LCD_Write_DATA(0x00,0x00);

//-------------- Panel Control -------------------//
LCD_Write_COM(0x00,0x90); LCD_Write_DATA(0x00,0x10);
LCD_Write_COM(0x00,0x92); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x93); LCD_Write_DATA(0x00,0x03);
LCD_Write_COM(0x00,0x95); LCD_Write_DATA(0x01,0x10);
LCD_Write_COM(0x00,0x97); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x98); LCD_Write_DATA(0x00,0x00);
LCD_Write_COM(0x00,0x07); LCD_Write_DATA(0x01,0x33);
               delayms(300);

9320.jpg (74.36 KB, 下载次数: 0) 下载附件 2012-4-26 18:36 上传

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。

7条回答

2020-02-04 23:30

算了把我的代码贴出来吧这个可是原创哇

//-------------------------------渐变填充 ----------------------------------------------------------
   #define Gradient_Vertical 1
   #define Gradient_Horizontal 0
void Fill_Gradient (u16 x,u16 y,u16 b,u16 h,u32 StartColor,u32 EndColor,char Dir)
{
double bl,n,p;
char i=0;
u16 R,G,B,R1,G1,B1,R2,G2,B2,color;
   //00 00  00
R1=    (StartColor>>8)&0xf800;
R2= (EndColor>>8)&0xf800;
G1=    (StartColor>>5)&0x07e0;
G2=    (EndColor>>5)&0x07e0;
B1=    (StartColor>>3)&0x001f;
B2=    (EndColor>>3)&0x001f;

if(Dir)    //  Gradient_Vertical
   {
bl=1/(double) h;
for(i=0;i<h;i++)
     {
n=i*bl;
p=n-(int)n ;
R=(int)(R1*(1-p)+R2*p)&0xf800;
G=(int)(G1*(1-p)+G2*p)&0x07e0;
B=(int)(B1*(1-p)+B2*p)&0x001f;
color=R+G+B;
LCD_Fill(  x,  y+i,  b,1,color);
}
      }else
   {
   bl=1/(double) b;
for(i=0;i<b;i++)
     {
n=i*bl;
p=n-(int)n ;
R=(int)(R1*(1-p)+R2*p)&0xf800;
G=(int)(G1*(1-p)+G2*p)&0x07e0;
B=(int)(B1*(1-p)+B2*p)&0x001f;
color=R+G+B;
LCD_Fill(  x+i,  y,  1,h,color);
}



   }

}
//-------------------------------渐变填充完毕----------------------------------------------------------

查看其它7个回答

一周热门更多>