本帖最后由 jemmy 于 2014-10-19 19:13 编辑
手上有pickit3,MPLAB v8.89 + HI-TECH PICC 9.83 pro,但没有所谓的仿真头。
这几天在用这个芯片的时候都是修改程序后直接烧写的,很痛苦。
想在线仿真,出现以下错误提示:
PK3Err0040: The target device is not ready for debugging.
Please check your configuration bit settings and program
the device before proceeding.
我在百度上查的时候,有的人说可以直接仿真,有的人说不可以。请教一下有没有知道到底能不能直接在线仿真的?如果可以,请指条明路。如果不行,我也就死了这条心了。
谢谢。
另外,我的configure bit如下:
configure.JPG (67.14 KB, 下载次数: 0)
下载附件
2014-10-19 19:13 上传
This Processor Extension Pak is optional for debugging the following devices and is intended for those who wish to debug the PIC16F1509 family of microcontrollers in-circuit, while freeing up I/O pins typically reserved for debugger use:
-PIC16F1509
-PIC16F1508
The product is required for debugging the following devices:
-PIC16F1507
-PIC16F1503
-PIC12F1501
Package contents:
-Main product: QTY 1: 02-02208-3 ASSY, PROCESSOR EXTENSION PAK (PIC16F1509-ICE)
-SIL Adapter: QTY 1: 02-01988 ASSY, RJ11 JACK TO SIL ADAPTER
-Gold pins: QTY 2: CON0172 HDR, 1x10 0.100 (0.210) 0.018 ROUND
The included SIL adapter interfaces the Processor Extension Pak with the MPLAB REAL ICE and MPLAB ICD 3 tools. The main product will interface directly with the PICkit 3 without the use of the SIL adapter.
Reference the latest Header Board Specification (DS51292) document for more detailed information on this and other h
Standard Pricing:
In stock (processes immediately): 7
When can I get more?
Quantity:
ADD TO CART
Quantity CNY per Unit
1+ 307.80
一周热门 更多>