NXP

OPENSDA V2 开源，有人愿意做来用吗？（已解决）

2020-02-20 20:32发布

站内问答 / 51单片机
5614 32 32
本帖最后由 FSL_TICS_ZP 于 2014-10-8 16:32 编辑

文章地址：https://community.freescale.com/docs/DOC-100720
源代码地址：https://github.com/mbedmicro/CMSIS-DAP

OpenSDAv2:OpenSDAv2 uses the exact same hardware circuit as the original OpenSDA solution, and out of the box it still provides a debugger, drag-and-drop flash programmer, and virtual serial port over a single USB cable.
The difference is the firmware implementation:
  • OpenSDA: Programmed with the proprietary P&E Micro developed bootloader. P&E Micro is the default debug interface app.
  • OpenSDAv2: Programmed with the open-sourced CMSIS-DAP/mbed bootloader. CMSIS-DAP is the default debug interface app.



Firmware DeveloperKinetis K20 Based Hardware CircuitDefault Debug InterfaceDrag-and-drop Target MCUFlash ProgrammingVirtual Serial PortSource Code AvailableOpenSDAP&E MicroxP&E Micro.srec/.s19x
OpenSDAv2ARM/mbed.orgxCMSIS-DAP.binxx
友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。
32条回答
tim
2020-02-24 01:01
cn_x 发表于 2014-9-10 12:46
原理图你直接看FRDM板的原理图，opensda部分

还没有板子，等有了板子后弄弄玩

一周热门 更多>