这个是错误提示
root@t-VirtualBox:~/libnfc-1.7.0# nfc-list
debug libnfc.general log_level is set to 3
debug libnfc.general allow_autoscan is set to true
debug libnfc.general allow_intrusive_scan is set to false
debug libnfc.general 1 device(s) defined by user
debug libnfc.general #0 name: "microBuilder.eu", connstring: "pn532_uart:/dev/ttyUSB0"
nfc-list uses libnfc 1.7.0
debug libnfc.driver.pn532_uart Attempt to open: /dev/ttyUSB0 at 115200 bauds.
debug libnfc.bus.uart Serial port speed requested to be set to 115200 bauds.
debug libnfc.chip.pn53x Diagnose
debug libnfc.chip.pn53x Timeout value: 500
debug libnfc.bus.uart TX: 55 55 00 00 00 00 00 00 00 00 00 00 00 00 00 00
debug libnfc.chip.pn53x SAMConfiguration
debug libnfc.chip.pn53x Timeout value: 1000
debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 14 01 17 00
debug libnfc.bus.uart RX: 55 55 00 00 00 00
error libnfc.chip.pn53x Unexpected PN53x reply!
pn53x_check_communication: Input / Output Error
debug libnfc.chip.pn53x InRelease
debug libnfc.bus.uart TX: 00 00 ff 03 fd d4 52 00 da 00
debug libnfc.bus.uart RX: 00 00 02 f8 d4 52
error libnfc.chip.pn53x Unexpected PN53x reply!
debug libnfc.general Unable to open "pn532_uart:/dev/ttyUSB0".
nfc-list: ERROR: Unable to open NFC device: pn532_uart:/dev/ttyUSB0
用的是Breakout Board,PN532 Adafruit的.奇怪啊.
此帖出自
小平头技术问答
一周热门 更多>