NUCLEO-L432 nucleo遇到了问题

2019-07-14 16:24发布

焊盘掉了一个
为什么是通的?有什么意义科普一下?PA6和PB6是通的.0欧电阻是焊上的
为什么这么设计?








友情提示: 此问题已得到解决,问题已经关闭,关闭后问题禁止继续编辑,回答。
10条回答
daitz
2019-07-15 02:36
本帖最后由 harvardx 于 2016-8-17 19:14 编辑

善于发现问题
SB16 ON  STM32 PB6 is connected to CN4 pin 7 for I2C SDA support onArduino Nano A5. In such case STM32 PB6 does not supportArduino Nano D5 and PA6 must be configured as input floating
SB16 OFF CN4 pin 7 is used as Arduino Nano analog input A5 without I2Csupport and CN3 pin 8 is available as Arduino Nano D5.


同理SB18
ONSTM32 PB7 is connected to CN4 pin 8 for I2C SCL support onArduino Nano A4. In such case STM32 PB7 does not supportArduino Nano D4 and PA5 must be configured as input floating.

OFF CN4 pin 8 is used as Arduino Nano analog input A4 without I2Csupport and CN3 pin 7 is available as Arduino Nano D4.

一周热门 更多>