我根据官方例程修改的，测试时全部写入20，但读出来为0，应该是写入进去了。查了几遍没查到错误，麻烦帮我看一眼。

void FLASH_Eraser()
{
         /* Clear pending flags (if any) */  
        FLASH_ClearFlag(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |
                      FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR|FLASH_FLAG_PGSERR);

        /* Get the number of the start and end sectors */
        StartSector = GetSector(FLASH_USER_START_ADDR);
        EndSector = GetSector(FLASH_USER_END_ADDR);

        for (SectorCounter = StartSector; SectorCounter < EndSector; SectorCounter += 8)
        {
        /* Device voltage range supposed to be [2.7V to 3.6V], the operation will
           be done by word */
                if (FLASH_EraseSector(SectorCounter, VoltageRange_3) != FLASH_COMPLETE)
                {
                  /* Error occurred while sector erase.
                     User can add here some code to deal with this error  */
                        while (1);
                }
        }
}


void FLASH_Write(aCm *Buf)
{
         tPriint32                Value=20;
//         float *         Ptr=(float*)Buf;
       
         FLASH_Unlock();
         FLASH_Eraser();
        Address = FLASH_USER_START_ADDR;
       

        while (Address < FLASH_USER_END_ADDR)
        {
               
                if (FLASH_ProgramWord(Address,Value) == FLASH_COMPLETE)
                {
                        Address = Address + 4;
                }
                else
                {
                        while (1);
                }
        }
        FLASH_Lock();
}



tPriint32  data32=5；
void FLASH_Read(aCm *Buf)
{
        tPriint32 *Ptr=(tPriint32*)Buf;
         Address = FLASH_USER_START_ADDR;

        while (Address < FLASH_USER_END_ADDR)
        {
                data32 = *(__IO uint32_t*)Address;
                Address = Address + 4;
         }  
}

程序写入时没有停在while（1）处，说明已经写入进去了，但不知道为什么读出来是0