基于51单片机程序改错-鹭泳存的回答

基于51单片机程序改错

2019-07-15 15:26发布

      这个程序用来实现液晶时钟，编译时出" error C193: '/': bad operand type"，请问错在那里啊，怎么该这个错。
程序如下：
      #include <reg52.h>
#include <absacc.h>
#include <intrins.h>

#define uchar unsigned char
#define unit unsigned int

sbit T_CLK = P1^3;
sbit T_IO = P1^4;
sbit T_RST = P1^2;
sbit RS = P1^7;
sbit RW = P1^6;
sbit EN = P1^5;
sbit key0 = P3^0;
sbit key1 = P3^1;
sbit key3 = P3^2;
sbit ACC7 = ACC^7;
sbit ACC0 = ACC^0;

uchar datechar[] = {"DATE:"};
uchar timechar[] = {"TIME:"};
uchar datebuffer[8] = {0,0,0x2d,0,0,0x2d,0,0};
uchar timebuffer[8] = {0,0,0x3a,0,0,0x3a,0,0};
uchar data ttime[3] = {0x00,0x00,0x00};
uchar data tdata[3] = {0x00,0x00,0x00};

void WriteB(uchar ucDa)
{
uchar i;
ACC = ucDa;
for(i=8;i>0;i--)
{
T_IO = ACC0;
T_CLK = 1;
T_CLK = 0;
ACC = ACC >> 1;
}
}

uchar  ReadB(void)
{
uchar i;
for(i=8;i>0;i--)
{
ACC = ACC >> 1;
ACC7 = T_IO;
T_CLK = 1;
T_CLK = 0;
}
return(ACC);
}

void V_W1302(uchar ucAddr,uchar ucDa)
{
T_RST = 0;
T_CLK = 0;
_nop_ ();
_nop_();
T_RST = 1;
_nop_();
_nop_();
WriteB(ucAddr);
WriteB(ucDa);
T_CLK = 1;
T_RST = 0;
}

uchar uc_R1302(uchar ucAddr)
{
uchar ucDa = 0;
T_RST = 0;
T_CLK = 0;
T_RST = 1;
WriteB(ucAddr);
ucDa = ReadeB();
T_CLK = 1;
T_RES = 0;
return(ucDa);
}

void fbusy()
{
P2 = 0xff;
RS = 0;
RW = 1;
EN = 1;
EN = 0;
while((P2 & 0x80))
{
EN = 0;
EN = 1;
}
}

void wc51r(uchar j)
{
fbusy();
EN = 0;
RS = 0;
RW = 0;
EN = 1;
P2 = j;
EN = 0;
}

void wc51ddr(uchar j)
{
fbusy();
EN = 0;
RS = 1;
RW = 0;
EN = 1;
P2 = j;
EN = 0;
}

void init()
{
wc51r(0x01);
wc51r(0x38);
wc51r(0x0c);
wc51r(0x06);
}

void delay(uint i)
{
uint y,j;
for(j=0;j<i;j++)
{
for(y=0;y<0xff;y++){;}
}
}

void main(void)
{
uchar i,set;
uchar data temp;
SP = 0x50;
delay(10);
init();
wc51r(0x80);
for(i=0;i<5;i++)
wc51ddr(datechar[i]);
wc51r(0xc0);
for(i=0;i<5;i++)
wc51ddr(timechar[i]);
while(1)
{
P3 = 0xFF;
if(key0 == 0)
{
delay(10);
if(key0 == 0)
{
while(key0 == 0);
set++;
if(set == 6) set=0;
}
}
if(key1 == 0)
{
delay(10);
if(key1 == 0)
{
while(key1 == 0);
switch(set)
{
case 1:
tdata[0]++;
if(tdata[0] == 100)
tdata[0] = 0;
temp = (tdata[0]/10)*16 + tdata[0]%10;
V_W1302(0x8e,0);
V_W1302(0x8c,temp);
V_W1302(0x8e,0x80);
break;
case 2:
tdata[1]++;
if(tdata[1] == 13)
tdata[1] = 1;
temp = (tdata[1]/10)*16 + tdata[1]%10;
V_W1302(0x8e,0);
V_W1302(0x88,temp);
V_W1302(0x8e,0x80);
break;
case 3:
tdata[2]++;
if(tdata[2] == 32)
tdata[2] = 1;
temp = (tdata[2]/10)*16 + tdata[2]%10;
V_W1302(0x8e,0);
V_W1302(0x86,temp);
V_W1302(0x8e,0x80);
break;
case 4:
ttime[2]++;
if(ttime[2] == 24)
ttime[2] = 0;
temp = (ttime[2]/10)*16 + ttime[2]%10;
V_W1302(0x8e,0);
V_W1302(0x84,temp);
V_W1302(0x8e,0x80);
break;
case 5:
ttime[1]++;
if(ttime[1] == 60)
ttime[1] = 0;
temp = (ttime[1]/10)*16 + ttime[1]%10;
V_W1302(0x8e,0);
V_W1302(0x82,temp);
V_W1302(0x8e,0x80);
break;
}
}
}
if(key2 == 0)
{
delay(10);
if(key2 == 0)
{
while(key2 == 0);
switch(set)
{
case 1:
tdata[0]--;
if(tdata[0] == 0xff)
tdata[0] = 99;
temp = (tdata[0]/10)*16 + tdata[0]%10;
V_W1302(0x8e,0);
V_W1302(0x8c,temp);
V_W1302(0x8e,0x80);
break;
case 2:
tdata[1]--;
if(tdata[1] == 0x00)
tdata[1] = 12;
temp = (tdata[1]/10)*16 + tdata[1]%10;
V_W1302(0x8e,0);
V_W1302(0x88,temp);
V_W1302(0x8e,0x80);
break;
case 3:
tdata[2]--;
if(tdata[2] == 0x00)
tdata[2] = 31;
temp = (tdata[2]/10)*16 + tdata[2]%10;
V_W1302(0x8e,0);
V_W1302(0x86,temp);
V_W1302(0x8e,0x80);
break;
case 4:
      ttime[2]--;
if(ttime[2] == 0xff)
ttime[2] = 23;
temp = (ttime[2]/10)*16 + ttime[2]%10;
V_W1302(0x8e,0);
V_W1302(0x84,temp);
V_W1302(0x8e,0x80);
break;
case 5:
ttime[1]--;
if(ttime[1] == 0xff)
ttime[1] = 59;
temp = (ttime[1]/10)*16 + ttime[1]%10;
V_W1302(0x8e,0);
V_W1302(0x82,temp);
V_W1302(0x8e,0x80);
break;
}
}
}
temp = uc_R1302(0x8d);
tdata[0] = (temp/16)*10 + temp%16;
datebuffer[0] = 0x30 + temp/16;
datebuffer[1] = 0x30 + temp%16;

temp = uc_R1302(0x89);
tdata[1] = (temp/16)*10 + temp%16;
datebuffer[3] = 0x30 + temp/16;
datebuffer[4] = 0x30 + temp%16;

temp = uc_R1302(0x87);
tdata[2] = (temp/16)*10 + temp%16;
datebuffer[6] = 0x30 + temp/16;
datebuffer[7] = 0x30 + temp%16;

temp = uc_R1302(0x85);
temp = temp & 0x7f;
ttime[2] = (temp/16)*10 + temp%16;
timebuffer[0] = 0x30 + temp/16;
timebuffer[1] = 0x30 + temp%16;

temp = uc_R1302(0x83);
ttime[1] = (temp/16)*10 + temp%16;
timebuffer[3] = 0x30 + temp/16;
timebuffer[4] = 0x30 + temp%16;

temp = uc_R1302(0x81);
temp = temp & 0x7f;
ttime[0] = (temp/16)*10 + temp%16;
timebuffer[6] = 0x30 + temp/16;
timebuffer[7] = 0x30 + temp%16;

wc51r(0x86);
for(i=0;i<8;i++) wc51addr(datebuffer[i]);
wc51r(0xc6);
for(i=0;i<8;i++) wc51ddr(timebuffer[i]);
}
}

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。

6条回答

鹭泳存

2019-07-16 14:37

zhoukai16702969 发表于 2015-12-10 16:24
不是我打击你哈我把你的程序复制了一下试试结果这错报的都不知道多少个了你确定只有这么一个错误么我是真的让你无奈了学学模块化编程吧程序更明了没有这么难看了。

我运行是只是只有数据类型这个错误，不过我重新弄过，现在弄好了

查看其它6个回答

基于51单片机程序改错

一周热门更多>

相关问题

相关文章

基于51单片机程序改错

打开微信“扫一扫”，打开网页后点击屏幕右上角分享按钮

一周热门 更多>

相关问题

相关文章

采纳回答

编辑标签

举报内容

检举类型

检举原因

检举说明(必填)

打开微信“扫一扫”，打开网页后点击屏幕右上角分享按钮

付费偷看金额在0.1-10元之间

一周热门更多>