【创龙TMS320C665x开发板试用】问题(三):XDS200使用两次后无法使用(暂解决)

2019-07-15 19:19发布

本帖最后由 jinyi7016 于 2016-4-3 06:00 编辑

安装上CCS6以后,XDS200的驱动终于正常了,开始可以用,下载速率是高了不少,可是用了两次就连接不上了。
test后错误如下:
  1. [Start]

  2. Execute the command:

  3. %ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -S integrity

  4. [Result]


  5. -----[Print the board config pathname(s)]------------------------------------

  6. C:UsersADMINI~1AppDataLocal.ti4084209646
  7.     0BrdDat estBoard.dat

  8. -----[Print the reset-command software log-file]-----------------------------

  9. This utility has selected a 560/2xx-class product.
  10. This utility will load the program 'xds2xxu.out'.
  11. E_RPCENV_IO_ERROR(-6) No connection: DTC_IO_Open::dtc_io
  12. Failed to open i/o connection (xds2xxu:0)

  13. An error occurred while soft opening the controller.

  14. -----[An error has occurred and this utility has aborted]--------------------

  15. This error is generated by TI's USCIF driver or utilities.

  16. The value is '-250' (0xffffff06).
  17. The title is 'SC_ERR_ECOM_EMUNAME'.

  18. The explanation is:
  19. An attempt to access the named emulator via USCIF ECOM has failed.

  20. [End]
复制代码
这又怎么解啊?

在launch时,会出现如下的错误。
捕获.PNG

问题分析:

这个可能是安装了CCS5.5又安装了CCS6.1后,有两个XDS200的驱动的原因吧。目前是卸载了其中一个。

友情提示: 此问题已得到解决,问题已经关闭,关闭后问题禁止继续编辑,回答。