新手求助：官方Lauchpad示例中的中断按按键不起作用-qinkaiabc的回答

新手求助：官方Lauchpad示例中的中断按按键不起作用

2019-03-24 12:16发布

11478 4

//***************************************************************************************
// MSP430 Blink LED / Start Stop Blinking with Button Demo - Software Toggle P1.0 & P1.6
//
// Description; Toggle P1.0 and P1.6 by xor'ing them inside of a software loop. To
// start/stop blink, an interrupt in Port 1 will toggle the condition statement.
// ACLK = n/a, MCLK = SMCLK = default DCO
//
// MSP430x2xx
// -----------------
// /|| XIN|-
// | | |
// --|RST XOUT|-
// | P1.6|-->LED
// Button -->|P1.3 P1.0|-->LED
//
// Aldo Briano
// Texas Instruments, Inc
// June 2010
// Built with Code Composer Studio v4
//***************************************************************************************
#include
#define LED_0 BIT0
#define LED_1 BIT6
#define LED_OUT P1OUT
#define LED_DIR P1DIR
#define BUTTON BIT3
unsigned int blink = 0;
void main(void)
{
WDTCTL = WDTPW + WDTHOLD; // Stop watchdog timer
LED_DIR |= (LED_0 + LED_1); // Set P1.0 and P1.6 to output direction
LED_OUT &= ~(LED_0 + LED_1); // Set the LEDs off
P1IE |= BUTTON;
__enable_interrupt();
for (;;)
{
if(blink > 0)
{
P1OUT ^= (LED_0 + LED_1); // Toggle P1.0 and P1.6 using exclusive-OR
__delay_cycles(100000); // SW Delay of 10000 cycles at 1Mhz
}
}
}
// Port 1 interrupt service routine
#pragma vector=PORT1_VECTOR
__interrupt void Port_1(void)
{
blink ^= 0x01;
P1IFG &= ~BUTTON; // P1.3 IFG cleared
LED_OUT &= ~(LED_0 + LED_1); // Clear the LEDs so they start in OFF state
}

复制代码发现按按键不起作用，用手指去触碰P1.3或者按键底部的PIN倒有灯闪烁

是按键坏了吗？还是什么情况？此帖出自小平头技术问答

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。

4条回答

2019-03-24 14:43

Msp430奇怪现象
http://bbs.eeworld.com.cn/thread-367244-1-1.html
对于"Msp430奇怪现象"，问题已解决！！！
http://bbs.eeworld.com.cn/thread-367245-1-1.html