iar+jlink+9b96提示如下：已经设置了0x00001000
Wed Jun 22 10:06:02 2011: Loaded macro file: C:Program FilesIAR SystemsEmbedded Workbench 5.4 Evaluation_0armconfigflashloaderTexasInstrumentsFlashLM3Sxxx.mac
Wed Jun 22 10:06:04 2011: JLINK command: ProjectFile = D:kkkkkLM3SLib_Interrupt_GPIO-OKsettingsDemo_Debug.jlink, return = 0
Wed Jun 22 10:06:04 2011: JLINK command: device = LM3SxBxx, return = 0
Wed Jun 22 10:06:04 2011: DLL version: V4.14e, compiled Jun 30 2010 14:36:44
Wed Jun 22 10:06:04 2011: Firmware: J-Link ARM V7 compiled Jun 30 2009 11:05:27
Wed Jun 22 10:06:04 2011: JTAG speed is initially set to: 32 kHz
Wed Jun 22 10:06:04 2011: TotalIRLen = 4, IRPrint = 0x01
Wed Jun 22 10:06:04 2011: Found Cortex-M3 r2p0, Little endian.
Wed Jun 22 10:06:04 2011: TPIU fitted.
Wed Jun 22 10:06:04 2011: FPUnit: 6 code (BP) slots and 2 literal slots
Wed Jun 22 10:06:05 2011: Hardware reset with strategy 0 was performed
Wed Jun 22 10:06:05 2011: Initial reset was performed
Wed Jun 22 10:06:05 2011: Found 1 JTAG device, Total IRLen = 4:
Wed Jun 22 10:06:05 2011: #0 Id: 0x4BA00477, IRLen: 4, IRPrint: 0x1 CoreSight JTAG-DP
Wed Jun 22 10:06:05 2011: Turning off watchdog
Wed Jun 22 10:06:05 2011: 392 bytes downloaded and verified (0.74 Kbytes/sec)
Wed Jun 22 10:06:05 2011: Warning:
Verify error at address 0x200000B6, target byte: 0xFA, byte in file: 0xF2
Wed Jun 22 10:06:12 2011: Fatal error: There were warnings during download of FLASH loader, see Log Window Session aborted!
Wed Jun 22 10:06:12 2011: Failed to load flash loader: C:Program FilesIAR SystemsEmbedded Workbench 5.4 Evaluation_0armconfigflashloaderTexasInstrumentsFlashLM3SxxxRAM32K.out
Wed Jun 22 10:06:12 2011: Failed to load flash loader: C:Program FilesIAR SystemsEmbedded Workbench 5.4 Evaluation_0armconfigflashloaderTexasInstrumentsFlashLM3Sx8xx.flash
有时候能到调试界面，但是还是不能调试。警告如下：
Wed Jun 22 10:09:17 2011: Warning: Too many verify errors, only the first 200 are displayed
Wed Jun 22 10:09:21 2011: Warning: There were warnings during download, see Log Window
Wed Jun 22 10:09:21 2011: Loaded debugee: D:kkkkkLM3SLib_Interrupt_GPIO-OKDebugExeDemo.out
Wed Jun 22 10:09:21 2011: TotalIRLen = 4, IRPrint = 0x01
Wed Jun 22 10:09:21 2011: Found Cortex-M3 r2p0, Little endian.
Wed Jun 22 10:09:21 2011: TPIU fitted.
Wed Jun 22 10:09:21 2011: FPUnit: 6 code (BP) slots and 2 literal slots
Wed Jun 22 10:09:21 2011: Hardware reset with strategy 0 was performed
Wed Jun 22 10:09:22 2011: Warning: Stack pointer is setup to incorrect alignment. Stack addr = 0xF7BF4A57
Wed Jun 22 10:09:22 2011: Target reset
[
本帖最后由 shzps 于 2011-6-22 13:55 编辑 ]
此帖出自
小平头技术问答
{var%20f='http://v.t.sina.com.cn/share/share.php?appkey=1515056452',u=z||d.location,p=['&url=',e(u),'&title=',e(t||d.title),'&source=',e(r),'&sourceUrl=',e(l),'&content=',c||'gb2312','&pic=',e(p||'')].join('');function%20a(){if(!window.open([f,p].join(''),'mb',['toolbar=0,status=0,resizable=1,width=440,height=430,left=',(s.width-440)/2,',top=',(s.height-430)/2].join('')))u.href=[f,p].join('');};if(/Firefox/.test(navigator.userAgent))setTimeout(a,0);else%20a();})(screen,document,encodeURIComponent,'','','https://www.xiaopingtou.cn/data/attach/logo/logo.png', '推荐 shzps 的问题《iar中仿真9b96出现问题。》','https://www.xiaopingtou.net/q-9195.html','页面编码gb2312|utf-8默认gb2312'));){kind=link}
Wed Jun 29 16:01:01 2011: JTAG Speed is set to: 100 kHz
Wed Jun 29 16:01:02 2011: JTAG IDCODE = 0x4BA00477
Wed Jun 29 16:01:02 2011: AHB-AP ID = 0x24770011
Wed Jun 29 16:01:02 2011: AHB-AP ROM = 0xE00FF003
Wed Jun 29 16:01:02 2011: ROM Component ID = 0xB105100D
Wed Jun 29 16:01:02 2011: Device ID = 0x00000066 ()
Wed Jun 29 16:01:02 2011: Software reset was performed
Wed Jun 29 16:01:02 2011: Initial reset was performed
Wed Jun 29 16:01:02 2011: Turning off watchdog
Wed Jun 29 16:01:03 2011: 392 bytes downloaded and verified (0.56 Kbytes/sec)
Wed Jun 29 16:01:03 2011: Loaded debugee: C:Program FilesIAR SystemsEmbedded Workbench 5.4 Evaluation_0armconfigflashloaderTexasInstrumentsFlashLM3SxxxRAM32K.out
Wed Jun 29 16:01:03 2011: Target reset
Wed Jun 29 16:01:06 2011: Downloaded D:kkkkkLM3SLib_GPIO_Parallel-Bus程序DebugExeDemo.out to flash memory.
Wed Jun 29 16:01:06 2011: Software reset was performed
Wed Jun 29 16:01:08 2011: 8996 bytes downloaded into FLASH and verified (1.57 Kbytes/sec)
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x00001004, target byte: 0x00, byte in file: 0xD5
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x00001005, target byte: 0x00, byte in file: 0x32
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x0000100C, target byte: 0x02, byte in file: 0x07
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x0000100D, target byte: 0x20, byte in file: 0x33
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x00001014, target byte: 0x08, byte in file: 0x09
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x00001015, target byte: 0x02, byte in file: 0x33
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x0000102C, target byte: 0x00, byte in file: 0x09
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x0000102D, target byte: 0x00, byte in file: 0x33
Wed Jun 29 16:01:08 2011: Warning:
Verify error at address 0x0000137F, target byte: 0x11, byte in file: 0x1D
Wed Jun 29 16:01:08 2011: Warning: Too many verify errors, only the first 200 are displayed
Wed Jun 29 16:01:10 2011: Warning: There were warnings during download, see Log Window
Wed Jun 29 16:01:10 2011: Loaded debugee: D:kkkkkLM3SLib_GPIO_Parallel-Bus程序DebugExeDemo.out
Wed Jun 29 16:01:10 2011: Software reset was performed
Wed Jun 29 16:01:10 2011: Target reset
一周热门 更多>