proteus

求教大神12864为什么在反转的时候红 {MOD}那块用62

2019-07-18 11:50发布

站内问答 / proteus
6837 2 1649
反转的时候为什么红 {MOD}的地方用62，不用64,64和62是有一点点微小的差别这是为什么


#include <reg51.h>
#include <intrins.h>
#define uint unsigned int
#define uchar unsigned char
#define DATA P0 //LCD12864数据线
sbit RS=P2^2; // 数据指令 选择
sbit RW=P2^1; // 读写 选择
sbit EN=P2^0; // 读写使能
sbit cs1=P2^4; // 片选1
sbit cs2=P2^3; // 片选2

/********************************/
/*  定义中文字库  */
/********************************/
uchar code Hzk[]={
/*--  文字:  各  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x20,0x20,0x10,0x08,0x8F,0xB4,0x44,0x44,0xA4,0x9C,0x04,0x00,0x00,0x00,0x00,
0x02,0x02,0x02,0x01,0x7F,0x42,0x42,0x42,0x42,0x42,0x42,0x7F,0x01,0x03,0x01,0x00,
/*--  文字:  位  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0xC0,0x30,0xEC,0x03,0x2A,0xC8,0x09,0x0A,0x0E,0x08,0xE8,0x48,0x08,0x00,0x00,
0x01,0x00,0x00,0x7F,0x20,0x20,0x20,0x27,0x20,0x30,0x2E,0x21,0x20,0x20,0x20,0x00,
/*--  文字:  单  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0xF8,0x28,0x29,0x2E,0x2A,0xF8,0x28,0x2C,0x2B,0x2A,0xF8,0x00,0x00,0x00,
0x08,0x08,0x0B,0x09,0x09,0x09,0x09,0xFF,0x09,0x09,0x09,0x09,0x0B,0x08,0x08,0x00,
/*--  文字:  片  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0xFE,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x00,0x00,
0x00,0x80,0x60,0x1F,0x02,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x00,
/*--  文字:  机  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x08,0x08,0xC8,0xFF,0x48,0x88,0x08,0x00,0xFE,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
0x04,0x03,0x00,0xFF,0x00,0x41,0x30,0x0C,0x03,0x00,0x00,0x00,0x3F,0x40,0x78,0x00,
/*--  文字:  爱  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x40,0xB2,0x96,0x9A,0x92,0xF6,0x9A,0x93,0x91,0x99,0x97,0x91,0x90,0x30,0x00,
0x40,0x20,0xA0,0x90,0x4C,0x47,0x2A,0x2A,0x12,0x1A,0x26,0x22,0x40,0xC0,0x40,0x00,
/*--  文字:  好  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x10,0xF0,0x1F,0x10,0xF0,0x80,0x82,0x82,0x82,0xF2,0x8A,0x86,0x82,0x80,0x00,
0x80,0x43,0x22,0x14,0x0C,0x73,0x20,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,
/*--  文字:  者  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x20,0x24,0x24,0x24,0x24,0xA4,0xBF,0x64,0x24,0x34,0x28,0x26,0x24,0x20,0x00,
0x04,0x04,0x04,0x02,0x02,0xFF,0x49,0x49,0x49,0x49,0x49,0x49,0xFF,0x00,0x00,0x00,
/*--  文字:  你  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x80,0x40,0xF0,0x2C,0x43,0x20,0x98,0x0F,0x0A,0xE8,0x08,0x88,0x28,0x1C,0x08,0x00,
0x00,0x00,0x7F,0x00,0x10,0x0C,0x03,0x21,0x40,0x3F,0x00,0x00,0x03,0x1C,0x08,0x00,
/*--  文字:  们  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x80,0x40,0xF0,0x1C,0x03,0xF0,0x01,0x0E,0x04,0x00,0x04,0x04,0x04,0xFC,0x00,0x00,
0x00,0x00,0x7F,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x3F,0x00,0x00,
/*--  文字:  辛  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x80,0x84,0x84,0x94,0xA4,0xC4,0x85,0x86,0x84,0xC4,0xA4,0x94,0x84,0x84,0x80,0x00,
0x00,0x04,0x04,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00,
/*--  文字:  苦  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x44,0x44,0x44,0x44,0x5F,0x44,0xF4,0x44,0x44,0x5F,0x44,0x44,0x44,0x44,0x00,
0x00,0x00,0x00,0x7E,0x22,0x22,0x22,0x23,0x22,0x22,0x22,0x7E,0x00,0x00,0x00,0x00,
/*--  文字:  了  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x02,0x02,0x02,0x02,0x02,0x02,0xF2,0x12,0x0A,0x0A,0x06,0x06,0x02,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*--  文字:  希  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x20,0x30,0x30,0xA9,0x6A,0x3A,0x24,0xE4,0x2A,0x29,0x30,0x20,0x20,0x20,0x00,
0x08,0x04,0x02,0x01,0x3F,0x01,0x01,0x01,0xFF,0x01,0x21,0x61,0x3F,0x00,0x00,0x00,
/*--  文字:  望  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x04,0x04,0xFC,0x85,0x46,0x24,0x04,0x80,0x7E,0x2A,0x2A,0xAA,0xAA,0xFE,0x00,0x00,
0x00,0x40,0x42,0x4A,0x4A,0x4A,0x4A,0x7E,0x4A,0x4A,0x4A,0x4A,0x4A,0x42,0x40,0x00,
/*--  文字:  大  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x20,0x20,0x20,0x20,0x20,0xA0,0x7F,0xA0,0x20,0x20,0x20,0x20,0x20,0x20,0x00,
0x00,0x80,0x40,0x20,0x10,0x0C,0x03,0x00,0x01,0x06,0x08,0x30,0x60,0xC0,0x40,0x00,
/*--  文字:  家  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x18,0x04,0x14,0x94,0x94,0xD5,0xB6,0x14,0x14,0x94,0x04,0x14,0x0C,0x04,0x00,
0x00,0x29,0x29,0x15,0x14,0x4A,0x89,0x44,0x3F,0x06,0x09,0x09,0x10,0x30,0x10,0x00,
/*--  文字:  能  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0xB8,0x97,0x92,0x90,0x94,0xB8,0x10,0x00,0x7F,0x48,0x48,0x44,0x74,0x20,0x00,
0x00,0xFF,0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x3F,0x44,0x44,0x42,0x72,0x20,0x00,
/*--  文字:  多  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0x20,0x90,0x88,0x54,0x53,0xA2,0x22,0x12,0x0A,0x06,0x00,0x00,0x00,
0x00,0x81,0x89,0x89,0x44,0x44,0x42,0x25,0x29,0x11,0x11,0x09,0x05,0x03,0x01,0x00,
/*--  文字:  多  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0x20,0x90,0x88,0x54,0x53,0xA2,0x22,0x12,0x0A,0x06,0x00,0x00,0x00,
0x00,0x81,0x89,0x89,0x44,0x44,0x42,0x25,0x29,0x11,0x11,0x09,0x05,0x03,0x01,0x00,
/*--  文字:  交  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x08,0x88,0x48,0x38,0x28,0x09,0x0E,0x0C,0x08,0x98,0x28,0x68,0x48,0x08,0x00,
0x00,0x80,0x80,0x40,0x41,0x22,0x14,0x18,0x0C,0x16,0x23,0x61,0xC0,0x40,0x00,0x00,
/*--  文字:  流  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x60,0x01,0x86,0x60,0x04,0x44,0x64,0x55,0x4E,0x44,0x64,0xC4,0x04,0x04,0x00,
0x04,0x04,0xFC,0x03,0x40,0x30,0x0F,0x00,0x00,0x7F,0x00,0x3F,0x40,0x40,0x70,0x00,
/*--  文字:  学  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x30,0x10,0x12,0x5C,0x54,0x50,0x51,0x5E,0xD4,0x50,0x18,0x57,0x32,0x10,0x00,
0x00,0x02,0x02,0x02,0x02,0x02,0x42,0x82,0x7F,0x02,0x02,0x02,0x02,0x02,0x02,0x00,
/*--  文字:  习  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x02,0x02,0x0A,0x12,0x22,0x62,0x02,0x82,0x82,0x42,0x02,0xFE,0x00,0x00,
0x00,0x00,0x04,0x0C,0x04,0x02,0x02,0x01,0x01,0x00,0x20,0x40,0x80,0x7F,0x00,0x00,
/*--  文字:  24   --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};

/****************************************/
/* 定义ASCII字库8列*16行  */
/****************************************/
uchar code Ezk[]={
/*--  文字:  Q  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,
/*--  文字:  Q  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,
/*--  文字:  3  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,
/*--  文字:  4  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
/*--  文字:  5  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,
/*--  文字:  4  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
/*--  文字:  1  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
/*--  文字:  5  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,
/*--  文字:  2  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,
/*--  文字:  4  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
/*--  文字:  4  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,

/*--  文字:     --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*--  文字:     --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*--  文字:     --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*--  文字:     --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*--  文字:     --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*--  文字:     --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
/*状态检查，LCD是否忙*/
void CheckState()  
{
   uchar dat;//状态信息（判断是否忙）
   RS=0; // 数据指令选择，D/I（RS）=“L” ，表示 DB7∽DB0 为显示指令数据
   RW=1; //R/W=“H” ，E=“H”数据被读到DB7∽DB0
   do{
      DATA=0x00;
      EN=1; //EN下降源
   _nop_(); //一个时钟延时
   dat=DATA;
      EN=0;
      dat=0x80 & dat; //仅当第7位为0时才可操作(判别busy信号)
      }while(!(dat==0x00));
}

/*写命令到LCD中*/
void SendCommandToLCD(uchar com)
{
   CheckState();//状态检查，LCD是否忙
   RS=0;  //向LCD发送命令。RS=0写指令，RS=1写数据
   RW=0;//R/W=“L” ，E=“H→L”数据被写到 IR 或 DR
   DATA=com;  //com :命令
   EN=1;//EN下降源
   _nop_();
   _nop_();
   EN=0;
}
/*设置页 0xb8是页的首地址*/
void SetLine(uchar page)
{
  page=0xb8|page; //1011 1xxx 0<=page<=7 设定页地址--X 0-7,8行为一页64/8=8，共8页
  SendCommandToLCD(page);
}
/*设定显示开始行，0xc0是行的首地址*/
void SetStartLine(uchar startline)     
{
  startline=0xc0|startline; //1100 0000
  SendCommandToLCD(startline); //设置从哪行开始：0--63，一般从0 行开始显示
}
/*设定列地址--Y 0-63 ，0x40是列的首地址*/
void SetColumn(uchar column)
{
  column=column &0x3f; //column最大值为64，越出 0=<column<=63
  column= 0x40|column; //01xx xxxx
  SendCommandToLCD(column);
}

/*开关显示，0x3f是开显示，0x3e是关显示*/
void SetOnOff(uchar onoff)   
{
onoff=0x3e|onoff; //0011 111x,onoff只能为0或者1
SendCommandToLCD(onoff);
}
/*写显示数据 */
void WriteByte(uchar dat)
{
   CheckState();//状态检查，LCD是否忙
   RS=1; //RS=0写指令，RS=1写数据
   RW=0;////R/W=“L” ，E=“H→L”数据被写到 IR 或 DR
   DATA=dat;//dat:显示数据
   EN=1; //EN下降源
   _nop_();
   _nop_();
   EN=0;
}

/*选择屏幕screen: 0-全屏,1-左屏,2-右屏*/
void SelectScreen(uchar screen)   
{        
   switch(screen)
   { case 0: cs1=0;//全屏
             _nop_(); _nop_(); _nop_();
             cs2=0;
             _nop_(); _nop_(); _nop_();
             break;
     case 1: cs1=0;//左屏
             _nop_(); _nop_(); _nop_();
             cs2=1;
             _nop_(); _nop_(); _nop_();
             break;
     case 2: cs1=1;//右屏
             _nop_(); _nop_(); _nop_();
             cs2=0;
             _nop_(); _nop_(); _nop_();
             break;
   }
}
/*清屏screen: 0-全屏,1-左屏,2-右*/
void ClearScreen(uchar screen)   
{  
     uchar i,j;
     SelectScreen(screen);
     
  for(i=0;i<8;i++)  //控制页数0-7，共8页
  {
         SetLine(i);
   SetColumn(0);
              for(j=0;j<64;j++)    //控制列数0-63，共64列
     {
                  WriteByte(0x00); //写点内容，列地址自动加1
              }
     }
      
}
/*延时程序*/
void delay(uint z)  
{
uint i,j;
for(i=0; i<z; i++)
  for(j = 0; j < 110; j++);
}
/*向上滚屏*//*这里用做滚动显示*/
void lcd_rol()     
{
  uint i;
for(i = 0; i < 64; i++)
{
  cs1=0; // 片选1
  SendCommandToLCD(0xc0+i);
  cs1=1;
  
     cs2=0;// 片选2
  SendCommandToLCD(0xc0+62-i);
  cs2=0; // 片选2
  
  delay(6);
}
}
/*初始化LCD*/
void InitLCD()   
{
CheckState();
SelectScreen(0);
SetOnOff(0); //关显示
SelectScreen(0);
SetOnOff(1); //开显示
SelectScreen(0);
ClearScreen(0);//清屏
SetStartLine(0); //开始行:0
}

/*显示全角汉字*/
void Display(uchar ss,uchar page,uchar column,uchar number)
{
int i; //选屏参数，pagr选页参数，column选列参数，number选第几汉字输出
  
SelectScreen(ss);
column=column&0x3f;
SetLine(page); //写上半页
SetColumn(column); //控制列
for(i=0;i<16;i++)  //控制16列的数据输出
{
WriteByte(Hzk[i+32*number]); //i+32*number汉字的前16个数据输出

}
SetLine(page+1);   //写下半页
SetColumn(column);    //控制列
    for(i=0;i<16;i++)   //控制16列的数据输出
{
WriteByte(Hzk[i+32*number+16]); //i+32*number+16汉字的后16个数据输出
}
}

/*显示半角汉字和数字和字母*/
void Displayen(uchar ss,uchar page,uchar column,uchar number)
{
uint i;//选屏参数，pagr选页参数，column选列参数，number选第几汉字输出
  
SelectScreen(ss);
column=column&0x3f;
SetLine(page); //写上半页
SetColumn(column);
    for(i=0;i<8;i++)
{
WriteByte(Ezk[i+16*number]);
}

SetLine(page+1); //写下半页
SetColumn(column);
    for(i=0;i<8;i++)
{
WriteByte(Ezk[i+16*number+8]);
}
}  
/*主函数*/
void main()
{  
uint i;
    InitLCD();//初始12864
     
    ClearScreen(0);//清屏
   
    SetStartLine(0);//显示开始行
   
    //while(1)
    {   
   /* 可以单个显示
    Display(2,0,0*16,0);//
  Display(2,0,1*16,1);//
  Display(2,0,2*16,2);//
  Display(2,0,3*16,3);//
  Display(1,0,4*16,4);//
  Display(1,0,5*16,5);//
  Display(1,0,6*16,6);//*
  /* 可以多个显示，这里是4个一起显示*/
     for(i=0;i<4;i++)
     {
   Display(2,0,i*16,i);/*Display(选屏参数(cs0,cs1)，pagr选页参数，column选列参数，number选第几汉字输出)*/
   _nop_();
   Display(1,0,i*16,i+4);
    _nop_();
   Display(2,2,i*16,i+8);
   _nop_();
   Display(1,2,i*16,i+12);
   _nop_();
   Display(2,4,i*16,i+16);
   _nop_();
   Display(1,4,i*16,i+20);
    }
   for(i=0;i<8;i++)
   {
  Displayen(2,6,i*8,i);
  _nop_(); ;
  Displayen(1,6,i*8,i+8);
    }  
}
/*这里用做滚动显示*/
while(1)
{
  lcd_rol();
  delay(1000);
}
}

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。
2条回答
1984619809
2019-07-18 12:18
一个汉字是两个字符，你仔细看下，是不是有个空格

一周热门 更多>

相关文章