Cisco Packet Tracer配置静态VLAN的步骤

2019-04-14 12:10发布

站内文章 / 模拟电子
10262 0 1184
  2. 1：VLAN数据库配置模式创建VLAN：                                                                                       Switch#vlan database   进入数据库模 式                                                                                     Switch(vlan)#vlan       2nameT1             //添加VLAN2，并命名为T1，如果不指定VLAN名称，交换机自动使用默认VLAN0002    Switch(vlan)#exit      //退出，保存              Cisco Packet Tracer配置静态VLAN的步骤

  4. 2 2： 全局配置模式创建 VLAN：                                                                                                         Switch(config)#vlan 2                                                                                                                   Switch(config-vlan)#name T2 Cisco Packet Tracer配置静态VLAN的步骤
  5. 3 3：将端口加入VLAN： Switch(config)# interface interface-id                                                                                              //inter f0/1  进入要配置 的端口 Switch(config-if)# switchport mode access                           //sw mode acc  定义二层端口模式 Switch(config-if)#switchport access vlan vlan-id                            //sw acc vlan 2  将端口添加到VLAN2中 Cisco Packet Tracer配置静态VLAN的步骤 Cisco Packet Tracer配置静态VLAN的步骤
  6. 4：也可同时将多个端口加入VLAN： Switch(config)# interface range f0/1  –10                             //inter rang f0/1 -10  选择端口1-10                                                                       Switch(config-if-range)# switchport access vlan vlan-id                             //sw acc valn 2 将端口1-10添加到vlan2Switch(config-if)# switchport mode access Cisco Packet Tracer配置静态VLAN的步骤 Cisco Packet Tracer配置静态VLAN的步骤
  7. 5 5：查看：show vlan brief Switch(config-if)# no switchport access vlan vlan-id                              //no sw acc vlan 2 将其从vlan2里面删除 Switch(config)# default interface interface-id                              //还原接口为默认配置状态 Cisco Packet Tracer配置静态VLAN的步骤 Cisco Packet Tracer配置静态VLAN的步骤 Cisco Packet Tracer配置静态VLAN的步骤

热门文章