推箱子游戏（完整第一关）
2019-04-15 12:19发布
生成海报
#include
#define uint unsigned int
#define uchar unsigned char
sbit rw=P2^0;
sbit rs=P2^2;
sbit en=P2^3;
sbit cs1=P2^4;
sbit cs2=P2^5;
sbit bflag=P3^7;
uchar n,renx,reny,i,flag=1,ff=0,f,aa,bb,cc,ax,bx,cx,j,k,m;
sbit up=P1^0;
sbit down=P1^2;
sbit le=P1^1;
sbit rig=P1^3;
sbit res=P1^4;
uchar temp[8][8];
uchar table[];
uchar code ttemp[8][8]={
0,0,0,0,0,0,0,0,
0,2,1,0,2,2,0,0,
0,2,2,2,2,2,2,0,
0,0,0,0,2,2,2,0,
0,2,4,0,0,2,2,0,
0,2,2,3,2,2,2,0,
0,2,2,2,2,2,0,0,
0,0,0,0,0,0,0,0
}; // 设置地图
uchar code ren[]={
0xff,0xff,0xe3,0xc5,0xb1,0xc5,0xe3,0xff
}; //人
uchar code mudi[]={
0xff,0xff,0xe7,0x81,0x81,0xe7,0xff,0xff
}; //目的地
uchar code xiangzi[]={
0xff,0xff,0xe7,0xdb,0xdb,0xe7,0xff,0xff
}; //箱子
uchar code niu[]={
0xef,0xe7,0xe9,0xeb,0x00,0xeb,0xef,0xff
};//牛
uchar code chan[]={
0x00,0x08,0x8b,0xce,0x78,0x08,0x00,0xf9,0xae,0xaa,0xf8,0xac,0xab,0xf8,0x00,0x00,
0x00,0x01,0x00,0x3f,0x00,0x02,0x02,0x02,0x02,0x02,0x3f,0x02,0x02,0x02,0x02,0x00
};//禅
void delayms(uint x)
{
uchar i;
while(x--)
{
for(i=0;i<10;i++);
}
}
void right()
{
cs1=1;
cs2=0;
}
void left()
{
cs1=0;
cs2=1;
}
void write_data(uchar dat)
{
rs=1; //写数据
rw=0;
en=0;
P3=dat;
en=1;
delayms(5);
en=0;
}
void write_cmd(uchar cmd)
{
rs=0; //写指令
rw=0;
en=0;
P3=cmd;
delayms(5);
en=1;
delayms(5);
en=0;
}
void Linefirst(uchar c)
{
uchar i;
i=c;
c=i|0x40;
write_cmd(c);
delayms(5);
}
void pagetwo(uchar c)
{
uchar i;
i=c;
c=i|0xb9;
write_cmd(c);
}
void Zfirst(uchar c)
{
uchar i;
i=c;
c=i|0xc0;
write_cmd(c);
delayms(5);
}
void Pagefirst(uchar c)
{
uchar i;
i=c;
c=i|0xb8;
// Busy_12864();
write_cmd(c);
delayms(5);
}
//设置显示位置
void lcd_pos(uchar x,uchar y,uchar z)
{
Linefirst(0x40+y*8);
Pagefirst(0xb8+x);
Zfirst(z);
}
//液晶的初始化
void lcd_init()
{
write_cmd(0x30);
delayms(5);
write_cmd(0x0c);
delayms(5);
write_cmd(0x01);
delayms(5);
}
//人的初始化
void ren_init()
{
lcd_pos(renx,reny,0xff); //第二行，第四列的方块
for(k=0;k<8;k++)
{
write_data(ren[k]);
}
}
//箱子的初始化
void xiangzi_init()
{
ax=0x68;
bx=0xbc;
cx=0xff;//箱子的初始位置
lcd_pos(ax,bx,cx); //第二行，第四列的方块
for(i=0;i<8;i++)
{
write_data(xiangzi[i]);
}
}
//目的地初始化
void mudi_init()
{
lcd_pos(0x48,0xbc,0xff);
for(i=0;i<8;i++)
{
write_data(mudi[i]);
}
}
void disp(dis)
{
//ff,f均为标志位
lcd_pos(renx,reny,0xff);//擦除
for(k=0;k<8;k++) write_data(0xff);
switch(dis) //判断按键的上下左右
{
case 0: renx--;break;
case 1: renx++;break;
case 2: reny--;break;
case 3: reny++;break;
case 4: break;
}
if(ttemp[renx][reny]==2||ttemp[renx][reny]==1)
{
if(ttemp[renx][reny]!=0&&ttemp[renx][reny]!=3&&ttemp[renx][reny]!=4){
while(up==0&&f==1){
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
while(down==0&&f==1){
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
while(le==0&&f==1){
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
while(rig==0&&f==1){
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
if(ttemp[renx][reny]==0) //防止穿墙
{
renx++;
flag=0;
}
}
}
}
void key()
{
ren_init();
if(up==0)
{
if(ttemp[renx-1][reny]!=0){ //判断是否能走
if(renx!=(ax+1)){ //判断不遇见箱子
U: lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(0xff);
renx--;
while(up==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
}
else if(ttemp[ax-1][bx]!=0&&reny==bx){ //判断是否遇见箱子和箱子是否能走
lcd_pos(ax,bx,0xff); //擦除箱子
for(k=0;k<8;k++) write_data(0xff);
ax--;
lcd_pos(renx,reny,0xff); //擦除小人
for(k=0;k<8;k++) write_data(0xff);
renx--;
while(up==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
lcd_pos(ax,bx,0xff);
for(k=0;k<8;k++) write_data(xiangzi[k]);
}
}
else if(ttemp[ax-1][bx]==0&&reny==bx&&renx==(ax+1))
{
}
else goto U;
}
}
if(down==0)
{
if(ttemp[renx+1][reny]!=0){ //判断是否能走
if(renx!=(ax-1)){ //判断不能遇见箱子
D: lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(0xff);
renx++;
while(down==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
}
else if(ttemp[ax+1][bx]!=0&&reny==bx){ //判断是否遇见箱子和箱子是否能走
lcd_pos(ax,bx,0xff); //擦除箱子
for(k=0;k<8;k++) write_data(0xff);
ax++;
lcd_pos(renx,reny,0xff); //擦除小人
for(k=0;k<8;k++) write_data(0xff);
renx++;
while(down==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
lcd_pos(ax,bx,0xff);
for(k=0;k<8;k++) write_data(xiangzi[k]);
}
}
else if(ttemp[ax+1][bx]==0&&reny==bx&&renx==(ax-1))
{
}
else
{
goto D;
}
}
}
if(le==0)
{
if(ttemp[renx][reny-1]!=0){ //判断是否能走
if(reny!=(bx+1)){ //判断不能遇见箱子
L: lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(0xff);
reny--;
while(le==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
}
else if(ttemp[ax][bx-1]!=0&&renx==ax){ //判断是否遇见箱子和箱子是否能走 &&reny==(bx+1)
lcd_pos(ax,bx,0xff); //擦除箱子
for(k=0;k<8;k++) write_data(0xff);
bx--;
lcd_pos(renx,reny,0xff); //擦除小人
for(k=0;k<8;k++) write_data(0xff);
reny--;
while(le==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
lcd_pos(ax,bx,0xff);
for(k=0;k<8;k++) write_data(xiangzi[k]);
}
}
else if(ttemp[ax][bx-1]==0&&renx==ax&&reny==(bx+1))
{
}
else
{
goto L;
}
}
}
if(rig==0)
{
if(ttemp[renx][reny+1]!=0){ //判断是否能走
if(reny!=(bx-1)){ //判断不能遇见箱子
R: lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(0xff);
reny++;
while(rig==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
}
}
else if(ttemp[ax][bx+1]!=0&&renx==ax){ //判断是否遇见箱子和箱子是否能走 &&reny==(bx+1)
lcd_pos(ax,bx,0xff); //擦除箱子
for(k=0;k<8;k++) write_data(0xff);
bx++;
lcd_pos(renx,reny,0xff); //擦除小人
for(k=0;k<8;k++) write_data(0xff);
reny++;
while(rig==0)
{
lcd_pos(renx,reny,0xff);
for(k=0;k<8;k++) write_data(ren[k]);
lcd_pos(ax,bx,0xff);
for(k=0;k<8;k++) write_data(xiangzi[k]);
}
}
else if(ttemp[ax][bx+1]==0&&renx==ax&&reny==(bx-1))
{
}
else
{
goto R;
}
}
}
}
void youxi_init()
{
right();
for(i=0;i<8;i++)
{
for(j=0;j<8;j++)
{
temp[i][j]=ttemp[i][j];
switch(temp[i][j])
{
case 0:lcd_pos(i,j,0xff);
for(k=0;k<8;k++)
write_data(0);
break;
case 1:lcd_pos(i,j,0xff);
renx=i;reny=j; //人的初始位置
for(k=0;k<8;k++)
write_data(ren[k]);
break;
case 2:lcd_pos(i,j,0xff);
for(k=0;k<8;k++)
write_data(0xff);
break;
case 3:lcd_pos(i,j,0xff);//箱子的位置
ax=i;bx=j;
for(k=0;k<8;k++)
write_data(xiangzi[k]);
break;
case 4:lcd_pos(i,j,0xff);
for(k=0;k<8;k++)
write_data(mudi[k]);
break;
}
}
}
}
void win()
{
left();
while(1)
{
lcd_pos(0x68,0xbc,0xff);
for(i=0;i<8;i++) //写一个牛字
{
write_data(niu[i]);
}
}
/* lcd_pos(0x58,0xbc,0xff);
for(i=0;i<16;i++)
{
write_data(chan[i]);
}
lcd_pos(0x58,0xbd,0xff);
for(i=16;i<32;i++)
{
write_data(chan[i]);
}*/
}
//第一关的人初始外置：（0x48，0xb9，0xff）；
//箱子的初始位置：（0x68，0xbc，0xff）；
//目的地位置：（0x48，0xbc，0xff）
//主函数
void main()
{
right();
lcd_init();
youxi_init();
ren_init();
while(1)
{
key();
if(ttemp[ax][bx]==4)
{
win();
}
}
}
打开微信“扫一扫”，打开网页后点击屏幕右上角分享按钮
{var%20f='http://v.t.sina.com.cn/share/share.php?appkey=1515056452',u=z||d.location,p=['&url=',e(u),'&title=',e(t||d.title),'&source=',e(r),'&sourceUrl=',e(l),'&content=',c||'gb2312','&pic=',e(p||'')].join('');function%20a(){if(!window.open([f,p].join(''),'mb',['toolbar=0,status=0,resizable=1,width=440,height=430,left=',(s.width-440)/2,',top=',(s.height-430)/2].join('')))u.href=[f,p].join('');};if(/Firefox/.test(navigator.userAgent))setTimeout(a,0);else%20a();})(screen,document,encodeURIComponent,'','','https://www.xiaopingtou.cn//data/attach/topic/topicKPo7gB.jpg', '推荐 yaomengzao 的文章《推箱子游戏（完整第一关）》','https://www.xiaopingtou.net/article-60123.html','页面编码gb2312|utf-8默认gb2312'));){kind=link}