/******************************************
*
* Description: EEPROM Read/Write.
* Author：LY
* Date: 2013-07-24
*
******************************************/
#include
#include "at24c128.h"
//Write:0xA0,Read:0xA1 读写间须延时
#define EEPROM_ADDR 0xA0
#define DELAY_TIME 1
extern void delay(uint uiCnt);
unsigned char i2c_eeprom_byte_write(unsigned int uiAddr, unsigned char ucData)
{
unsigned char ucTmp;
unsigned int uiTmp;
unsigned char i;
SDA = 1;
SCL = 1;
delay(DELAY_TIME);
//start bit
SDA = 0;
delay(DELAY_TIME);
//device addr
ucTmp = 0xA0;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{
SCL = 1;
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1;
}
//high address
uiTmp = uiAddr;
uiTmp >>= 8;
ucTmp = uiTmp;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{
SCL = 1;
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1;
}
//low address
ucTmp = uiAddr;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{
SCL = 1;
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1;
}
//data send
ucTmp = ucData;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{
SCL = 1;
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1;
}
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 0;
}
unsigned char i2c_eeprom_byte_read(unsigned int uiAddr)
{
unsigned char ucTmp;
unsigned int uiTmp;
unsigned char i;
unsigned char ucData;
F0=0;
SDA = 1;
SCL = 1;
delay(DELAY_TIME);
//start bit
SDA = 0;
delay(DELAY_TIME);
//device addr
ucTmp = 0xA0;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(100);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{
F0=1;
/* SCL = 1; //111
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1; //*/
}
//high address
uiTmp = uiAddr;
uiTmp >>= 8;
ucTmp = uiTmp;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{ F0=1;
/* SCL = 1; //111
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1; //*/
}
//low address
ucTmp = uiAddr;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{ F0=1;
/* SCL = 1; //111
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1; //*/
}
//start bit
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 0;
delay(DELAY_TIME);
//device address, read
ucTmp = 0xA1;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(ucTmp & 0x80)
{
SDA = 1;
}
else
{
SDA = 0;
}
delay(DELAY_TIME);
ucTmp <<= 1;
SCL = 1;
delay(DELAY_TIME);
}
//ack read
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 0) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{ F0=1;
/* SCL = 1; //111
delay(DELAY_TIME);
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return 1; //*/
}
//read data
ucData = 0;
for(i = 0; i<8;i++)
{
SCL = 0;
delay(DELAY_TIME);
if(SDA)
{
ucData |= 0x01;
}
else
{
ucData &= (~0x01);
}
if(i<7)
{
ucData <<= 1;
}
SCL = 1;
delay(DELAY_TIME);
}
//ack read, no ack----
SCL = 0;
SDA = 1;
delay(DELAY_TIME);
if(SDA == 1) //ack ok
{
SCL = 1;
delay(DELAY_TIME);
}
else //ack error
{
SCL = 1;
delay(DELAY_TIME);
}
//stop bit send
SCL = 0;
SDA = 0;
delay(DELAY_TIME);
SCL = 1;
delay(DELAY_TIME);
SDA = 1;
return ucData;
}
{var%20f='http://v.t.sina.com.cn/share/share.php?appkey=1515056452',u=z||d.location,p=['&url=',e(u),'&title=',e(t||d.title),'&source=',e(r),'&sourceUrl=',e(l),'&content=',c||'gb2312','&pic=',e(p||'')].join('');function%20a(){if(!window.open([f,p].join(''),'mb',['toolbar=0,status=0,resizable=1,width=440,height=430,left=',(s.width-440)/2,',top=',(s.height-430)/2].join('')))u.href=[f,p].join('');};if(/Firefox/.test(navigator.userAgent))setTimeout(a,0);else%20a();})(screen,document,encodeURIComponent,'','','https://www.xiaopingtou.cn//data/attach/topic/topicKPo7gB.jpg', '推荐 wqq995 的文章《EEPROM at24c256读写》','https://www.xiaopingtou.net/article-62050.html','页面编码gb2312|utf-8默认gb2312'));){kind=link}