#ifndef __USART_H__
#define __USART_H__
#include "stdio.h"
//#define infoprintf printf("[%d-%s()] : ",__LINE__, __FUNCTION__);printf
#define infoprintf(...)
int usart_init(int usart_num, int baud_rate);
int usart_send(int usart_num, const void *_send_buf, const int send_count);
int usart_send_it(int usart_num, const void *_send_buf, const int send_count);
int usart_receive_read(int usart_num, void *_receive_buf, const int receive_count);
void usart_rbne_it(int usart_num);
void usart_tbe_it(int usart_num);
#endif
/*******************************************************************************
file : platform_uasrt.c
author : huohongpeng
date : 2017-01-25
description : advance application for usart, base on gd lib
*******************************************************************************/
#include "platform_usart.h"
#include "gd32f1x0.h"
#define TX_BUF_SIZE 128
#define RX_BUF_SIZE 128
struct usart_dev
{
unsigned char tx_buf[TX_BUF_SIZE];
unsigned short tx_rd;
unsigned short tx_wr;
unsigned char rx_buf[RX_BUF_SIZE];
unsigned short rx_rd;
unsigned short rx_wr;
};
static struct usart_dev usart1_dev, usart2_dev;
/**
description : init uasrt1 and set baud rate
param : usart_num - 1,2
baud_rate - 4800,9600,14400, ...
retval : 0 - success
author : huohongpeng
date : 2017-01-25
*/
int usart_init(int usart_num, int baud_rate)
{
GPIO_InitPara GPIO_InitParaStruct;
USART_InitPara USART_InitParaStruct;
USART_TypeDef * usart_index[] = {0, USART1, USART2};
if(usart_num == 1)
{
RCC_APB2PeriphClock_Enable(RCC_APB2PERIPH_USART1, ENABLE);
RCC_AHBPeriphClock_Enable(RCC_AHBPERIPH_GPIOA, ENABLE);
/*usart1 Rx*/
GPIO_InitParaStruct.GPIO_Mode = GPIO_MODE_AF;
GPIO_InitParaStruct.GPIO_Pin = GPIO_PIN_10;
GPIO_InitParaStruct.GPIO_PuPd = GPIO_PUPD_PULLUP;
GPIO_InitParaStruct.GPIO_Speed = GPIO_SPEED_2MHZ;
GPIO_Init(GPIOA, &GPIO_InitParaStruct);
/*usart1 Tx*/
GPIO_InitParaStruct.GPIO_Mode = GPIO_MODE_AF;
GPIO_InitParaStruct.GPIO_OType = GPIO_OTYPE_PP;
GPIO_InitParaStruct.GPIO_Pin = GPIO_PIN_9;
GPIO_InitParaStruct.GPIO_Speed = GPIO_SPEED_2MHZ;
GPIO_Init(GPIOA, &GPIO_InitParaStruct);
GPIO_PinAFConfig(GPIOA, GPIO_PINSOURCE10, GPIO_AF_1);
GPIO_PinAFConfig(GPIOA, GPIO_PINSOURCE9, GPIO_AF_1);
}
else if(usart_num == 2)
{
RCC_APB1PeriphClock_Enable(RCC_APB1PERIPH_USART2, ENABLE);
RCC_AHBPeriphClock_Enable(RCC_AHBPERIPH_GPIOA, ENABLE);
/*usart2 Rx*/
GPIO_InitParaStruct.GPIO_Mode = GPIO_MODE_AF;
GPIO_InitParaStruct.GPIO_Pin = GPIO_PIN_15;
GPIO_InitParaStruct.GPIO_PuPd = GPIO_PUPD_PULLUP;
GPIO_InitParaStruct.GPIO_Speed = GPIO_SPEED_2MHZ;
GPIO_Init(GPIOA, &GPIO_InitParaStruct);
/*usart2 Tx*/
GPIO_InitParaStruct.GPIO_Mode = GPIO_MODE_AF;
GPIO_InitParaStruct.GPIO_OType = GPIO_OTYPE_PP;
GPIO_InitParaStruct.GPIO_Pin = GPIO_PIN_14;
GPIO_InitParaStruct.GPIO_Speed = GPIO_SPEED_2MHZ;
GPIO_Init(GPIOA, &GPIO_InitParaStruct);
GPIO_PinAFConfig(GPIOA, GPIO_PINSOURCE14, GPIO_AF_1);
GPIO_PinAFConfig(GPIOA, GPIO_PINSOURCE15, GPIO_AF_1);
}
else
{
return -1;
}
/*usartx attribute config*/
USART_InitParaStruct.USART_BRR = baud_rate;
USART_InitParaStruct.USART_HardwareFlowControl = USART_HARDWAREFLOWCONTROL_NONE;
USART_InitParaStruct.USART_Parity = USART_PARITY_RESET;
USART_InitParaStruct.USART_RxorTx = USART_RXORTX_RX |USART_RXORTX_TX;
USART_InitParaStruct.USART_STBits = USART_STBITS_1;
USART_InitParaStruct.USART_WL = USART_WL_8B;
USART_Init(usart_index[usart_num], &USART_InitParaStruct);
USART_Enable(usart_index[usart_num], ENABLE);
USART_INT_Set(usart_index[usart_num], USART_INT_RBNE, ENABLE);
return 0;
}
/**
description : usart send send_count characters
param : usart_num - 1, 2
_send_buf - send buffer
send_count - number of send
retval : 0 - success
author : huohongpeng
date : 2017-01-25
*/
int usart_send(int usart_num, const void *_send_buf, const int send_count)
{
const char *send_buf = (const char *)_send_buf;
USART_TypeDef * usart_index[] = {0, USART1, USART2};
int i;
if(usart_num < 1 || usart_num > 2)
{
return -1;
}
USART_INT_Set(usart_index[usart_num], USART_INT_RBNE, DISABLE);
for(i = 0; i < send_count; i++)
{
while(USART_GetBitState(usart_index[usart_num], USART_FLAG_TBE) == RESET);
USART_DataSend(usart_index[usart_num], send_buf[i]);
}
USART_INT_Set(usart_index[usart_num], USART_INT_RBNE, ENABLE);
return 0;
}
/**
description : rewrite fputc for printf
param : ...
retval : 0 - success
author : huohongpeng
date : 2017-01-25
other :
options->C/C++ compiler->preprocessor add symbal _DLIB_FILE_DESCRIPTOR
*/
int fputc(int ch, FILE *f)
{
usart_send_it(1, &ch, 1);
return ch;
}
/**
description : usart send base on usart send interrupt
param : usart_num - 1, 2
_send_buf - send buffer
send_count - number of send
retval : 0 - success
author : huohongpeng
date : 2017-01-26
*/
int usart_send_it(int usart_num, const void *_send_buf, const int send_count)
{
struct usart_dev *usart_dev;
struct usart_dev *usart_dev_index[] = {0, &usart1_dev, &usart2_dev};
USART_TypeDef* usart_index[] = {0, USART1, USART2};
const char *send_buf = (const char *)_send_buf;
int i;
if(usart_num < 1 || usart_num > 2)
{
return -1;
}
usart_dev = usart_dev_index[usart_num];
/*
Write send data to send buffer and use interrupt send data.
Wait buffer effective when send buffer is full.
*/
for(i = 0; i < send_count; i++)
{
while((usart_dev->tx_wr+1) % TX_BUF_SIZE == usart_dev->tx_rd);
usart_dev->tx_buf[usart_dev->tx_wr++] = send_buf[i];
usart_dev->tx_wr %= TX_BUF_SIZE;
USART_INT_Set(usart_index[usart_num], USART_INT_TBE, ENABLE);
}
return 0;
}
/**
description : read data from receive buffer
param : usart_num - 1, 2
_receive_buf - receive buffer
receive_count - number of receive
retval : -1 - success
other - real read count
author : huohongpeng
date : 2017-01-26
*/
int usart_receive_read(int usart_num, void *_receive_buf, const int receive_count)
{
struct usart_dev *usart_dev;
struct usart_dev *usart_dev_index[] = {0, &usart1_dev, &usart2_dev};
char *receive_buf = (char *)_receive_buf;
int i, receive_count_real;
if(usart_num < 1 || usart_num > 2)
{
return -1;
}
usart_dev = usart_dev_index[usart_num];
/*
Read data from receive buffer.
The buffer have data that received from usart.
*/
for(i = 0, receive_count_real = 0; i < receive_count; i++)
{
if(usart_dev->rx_rd == usart_dev->rx_wr)
{
return receive_count_real;
}
else
{
receive_buf[i] = usart_dev->rx_buf[usart_dev->rx_rd++];
usart_dev->rx_rd %= RX_BUF_SIZE;
receive_count_real++;
}
}
return receive_count_real;
}
/**
description : usart receive not empty interrupt hander, call in intterrupt function
param : usart_num - 1, 2
retval : None
author : huohongpeng
date : 2017-01-26
*/
void usart_rbne_it(int usart_num)
{
struct usart_dev *usart_dev;
struct usart_dev *usart_dev_index[] = {0, &usart1_dev, &usart2_dev};
USART_TypeDef* usart_index[] = {0, USART1, USART2};
if(usart_num < 1 || usart_num > 2)
{
return;
}
usart_dev = usart_dev_index[usart_num];
usart_dev->rx_buf[usart_dev->rx_wr++] = USART_DataReceive(usart_index[usart_num]);
usart_dev->rx_wr %= RX_BUF_SIZE;
/*
overflow handle
*/
if(usart_dev->rx_wr == usart_dev->rx_rd)
{
usart_dev->rx_rd++;
usart_dev->rx_rd %= RX_BUF_SIZE;
}
}
/**
description : usart transport empty interrupt hander, call in intterrupt function
param : usart_num - 1, 2
retval : None
author : huohongpeng
date : 2017-01-26
*/
void usart_tbe_it(int usart_num)
{
struct usart_dev *usart_dev;
struct usart_dev *usart_dev_index[] = {0, &usart1_dev, &usart2_dev};
USART_TypeDef* usart_index[] = {0, USART1, USART2};
if(usart_num < 1 || usart_num > 2)
{
return;
}
usart_dev = usart_dev_index[usart_num];
if(usart_dev->tx_rd != usart_dev->tx_wr)
{
USART_DataSend(usart_index[usart_num], usart_dev->tx_buf[usart_dev->tx_rd++]);
usart_dev->tx_rd %= TX_BUF_SIZE;
}
else
{
USART_INT_Set(usart_index[usart_num], USART_INT_TBE, DISABLE);
}
}
{var%20f='http://v.t.sina.com.cn/share/share.php?appkey=1515056452',u=z||d.location,p=['&url=',e(u),'&title=',e(t||d.title),'&source=',e(r),'&sourceUrl=',e(l),'&content=',c||'gb2312','&pic=',e(p||'')].join('');function%20a(){if(!window.open([f,p].join(''),'mb',['toolbar=0,status=0,resizable=1,width=440,height=430,left=',(s.width-440)/2,',top=',(s.height-430)/2].join('')))u.href=[f,p].join('');};if(/Firefox/.test(navigator.userAgent))setTimeout(a,0);else%20a();})(screen,document,encodeURIComponent,'','','https://www.xiaopingtou.cn//data/attach/topic/topicKPo7gB.jpg', '推荐 weixin_33795806 的文章《GD32 USART 高级编程 让你的串口不在阻塞发送》','https://www.xiaopingtou.net/article-63049.html','页面编码gb2312|utf-8默认gb2312'));){kind=link}