从这个总结正式开始了我的驱动之旅，心情不免有点激动，尽管现在对驱动的编写还很模糊，但还是有纪念意义的……   开发平台：     虚拟机下RedHat9，内核2.4.20.8     交叉编译编译器：天嵌公司提供的arm-linux-gcc 4.3.3     内核树：/home/linux-2.6.30.4 目标平台：     TQ2440，内核是ARM9     OS内核：天嵌公司提供的linux-2.6.30.4   关于天嵌的软件可以到http://bbs.embedsky.net/下载   废话少说，我的驱动源码是： demo.h: #ifndef _DEMO_H_
#define _DEMO_H_   #include  
#undef PDEBUG            
#ifdef DEMO_DEBUG
#ifdef __KERNEL__
#    define PDEBUG(fmt, args...) printk( KERN_DEBUG "DEMO: " fmt, ## args)
#else//usr space
#    define PDEBUG(fmt, args...) fprintf(stderr, fmt, ## args)
#endif
#else
#  define PDEBUG(fmt, args...)
#endif   #undef PDEBUGG
#define PDEBUGG(fmt, args...)   //设备号
#define DEMO_MAJOR 224
#define DEMO_MINOR 0
#define COMMAND1 1
#define COMMAND2 2   //设备结构
struct DEMO_dev
{
     struct cdev cdev;  
};   //函数申明
ssize_t DEMO_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos);
ssize_t DEMO_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos);
loff_t  DEMO_llseek(struct file *filp, loff_t off, int whence);
int     DEMO_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg);
#endif
  demo.c #include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include   #include "demo.h"   MODULE_AUTHOR("fgj");
MODULE_LICENSE("Dual BSD/GPL");   struct DEMO_dev *DEMO_devices;
static unsigned char demo_inc=0;
static u8 demoBuffer[256];   int DEMO_open(struct inode *inode, struct file *filp)
{
    struct DEMO_dev *dev;       if(demo_inc>0)return -ERESTARTSYS;
    demo_inc++;       dev = container_of(inode->i_cdev, struct DEMO_dev, cdev);
    filp->private_data = dev;       return 0;
}   int DEMO_release(struct inode *inode, struct file *filp)
{
    demo_inc--;
    return 0;
}   ssize_t DEMO_read(struct file *filp, char __user *buf, size_t count,loff_t *f_pos)
{
    int result;
    loff_t pos= *f_pos;
    if(pos>=256)
    {
         result=0;
         goto out;
    }
 if(count>(256-pos))
 {
     count=256-pos;
 }
 pos += count;
 
 if (copy_to_user(buf,demoBuffer+*f_pos,count))
 {
      count=-EFAULT;
      goto out;
 }
 
 *f_pos = pos;
 out:
 return count;
}   ssize_t DEMO_write(struct file *filp, const char __user *buf, size_t count,loff_t *f_pos)
{
    ssize_t retval = -ENOMEM;
    loff_t pos= *f_pos;
    if(pos>=256)
    {
         goto out;
    }
 if(count>(256-pos))
 {
     count=256-pos;
 }
 pos += count;    if (copy_from_user(demoBuffer+*f_pos, buf, count))  {
     retval = -EFAULT;
     goto out;
 }    *f_pos = pos;
 return count;
  out:
 return retval;
}   int DEMO_ioctl(struct inode *inode, struct file *filp,unsigned int cmd, unsigned long arg)
{
   if(cmd==COMMAND1)
   {
        printk("ioctl command1 successfully/n");
        return 0;
   }
   if(cmd==COMMAND2)
   {
        printk("ioctl command2 successfully/n");
        return 0;
   }
 
   printk("ioctl error/n");
          return -EFAULT;
}   loff_t DEMO_llseek(struct file *filp, loff_t off, int whence)
{
 loff_t pos;
 pos = filp->f_pos;
 switch (whence)
 {
 case 0:
     pos = off;
     break;
 case 1:
     pos += off;
     break;
 case 2:
 default:
     return -EINVAL;
 }
 
 if ((pos>256) || (pos<0))
 {
     return -EINVAL;
 }
 
 return filp->f_pos=pos;
}   struct file_operations DEMO_fops = {
    .owner =    THIS_MODULE,
    .llseek =   DEMO_llseek,
    .read =     DEMO_read,
    .write =    DEMO_write,
    .ioctl =    DEMO_ioctl,
    .open =     DEMO_open,
    .release =  DEMO_release,
};  
void DEMO_cleanup_module(void)
{
 dev_t devno = MKDEV(DEMO_MAJOR, DEMO_MINOR);    if (DEMO_devices)
 {
     cdev_del(&DEMO_devices->cdev);
     kfree(DEMO_devices);
 }    unregister_chrdev_region(devno,1);
}   int DEMO_init_module(void)
{
 int result;
 dev_t dev = 0;    dev = MKDEV(DEMO_MAJOR, DEMO_MINOR);
 result = register_chrdev_region(dev, 1, "DEMO");
 if (result < 0)
 {
     printk(KERN_WARNING "DEMO: can't get major %d/n", DEMO_MAJOR);
     return result;
 }    DEMO_devices = kmalloc(sizeof(struct DEMO_dev), GFP_KERNEL);
 if (!DEMO_devices)
 {
     result = -ENOMEM;
     goto fail;
 }
 memset(DEMO_devices, 0, sizeof(struct DEMO_dev));    cdev_init(&DEMO_devices->cdev, &DEMO_fops);
 DEMO_devices->cdev.owner = THIS_MODULE;
 DEMO_devices->cdev.ops = &DEMO_fops;
 result = cdev_add (&DEMO_devices->cdev, dev, 1);
 if(result)
 {
     printk(KERN_NOTICE "Error %d adding DEMO/n", result);
     goto fail;
 }    return 0;   fail:
 DEMO_cleanup_module();
 return result;
}   module_init(DEMO_init_module);
module_exit(DEMO_cleanup_module);   Makefile: AR=ar
ARCH = arm
CC = arm-linux-gcc
#CFLAGS += $(DEBFLAGS) -Wall
#CFLAGS += -I$(LDDINC)
#LDFLAGS = -Xlinker -rpath-link /opt/arm-linux-gcc/4.3.3
ifneq($(KERNELRELEASE),)
#call from kernel build system
obj-m := demo.o
else
KERNELDIR ?= /home/linux-2.6.30.4
PWD := $(shell pwd)
modules:
    $(MAKE) -C $(KERNELDIR) M=$(PWD) LDDINC=$(PWD)/../include modules
endif   好，现在我们要对内核树做点什么     cd /home/linux-2.6.30.4/     cp config_EmbedSky_W35_256MB .config     make oldconfig     make prepare(我试了试，这个不执行也行，不知道为啥）     make（或make zImage或make bzImage） 好，现在转到驱动程序目录     make 现在编译完毕，在编译过程中有可能出现很多问题，比如说，如果你的编译器不是4.3.3，可能出现： cc1: error: invalid option `abi=aapcs-linux' 解决办法：
修改内核配置：make menuconfig
    Kernel Features-->Use the ARM EABIto compile the kernel（不选择）   测试程序 test.c #include
#include
#include
#include
#include
#include
#include   #define COMMAND1 1
#define COMMAND2 2   main()
{
  int fd;
  int i;
 char data[256];
 
  int retval;
  fd=open("/dev/fgj",O_RDWR);
  if(fd==-1)
  {
     perror("error open/n");
     exit(-1);
  }
  printf("open /dev/smbus successfully/n");
  retval=ioctl(fd,COMMAND1,0);
  if(retval==-1)
  {
    perror("ioctl error/n");
    exit(-1);
  }
  printf("send command1 successfully/n");
 
  retval=write(fd,"fgj",3);
  if(retval==-1)
  {
    perror("write error/n");
    exit(-1);
  }
  retval=lseek(fd,0,0);
  if(retval==-1)
  {
    perror("lseek error/n");
    exit(-1);
  }
  retval=read(fd,data,3);
 
 if(retval==-1)
  {
    perror("read error/n");
    exit(-1);
  }
   printf("read successfully:%s/n",data);
  close(fd);
} 编译：arm-linux-gcc test.c -o test   将编译生成的demo.ko下载到开发板上，执行：     insmod demo.ko（可以用lsmod命令查看是否加载上，可以通过cat /proc/devices查看主设备号）     mknod /dev/fgj c 224 0（创建设备节点，224是主设备号）   将生成的测试文件下载到开发板上     chmod 777 test     ./test   如果打开设备成功，读写成功，OK！！！