嵌入式

移植嵌入式浏览器

2019-07-12 20:28发布

站内文章 / 嵌入式Linux
13270 0 1423
需要使用的文件：cross-2.95.3.tar.bz2              cross-arm-extra.tar.gz              tmake-1.11.tar.gz              jpegsrc.v6b.tar.gz              e2fsprogs-1.35.tar.gz               qt-x11-2.3.2.tar.gz              qt-embedded-2.3.7.tar.gz              qtopia-free-1.7.0.tar.gz              zlib-1.2.3.tar.gz              konqueror-embedded-snapshot-20030705.tar.gz   1.交叉编译工具的安装     #cd /usr/local/arm     #cp tmake-1.11.tar.gz .      #cp cross-arm-extra.tar.gz .      解压     #mkdir /usr/local/arm/2.95.3/arm-linux/include/uuid     #cp tmake-1.11/lib /usr/local/arm/2.95.3/arm-linux/lib -r     #cp cross-arm-extra/lib /usr/local/arm/2.95.3/arm-linux/lib -r     #cp cross-arm-extra/include /usr/local/arm/2.95.3/arm-linux/include -r     #cp cross-arm-extra/include/uuid/uuid.h /usr/local/arm/2.95.3/arm-linux/include/uuid 安装jpegsrc.v6b.tar.gz     #tar jpegsrc.v6b.tar.gz     #cd jpeg-6b     #./configure -enable-shared     #make     #make clean     #export PATH=/usr/local/arm/2.95.3/bin:$PATH     #./configure -enable-shared -prefix=/usr/local/arm/2.95.3/arm-linux     修改Makefile     /*      CC=arm-linux-gcc     AR=arm-linux-ar rc     AR2=arm-linux-ranlib     #make     #make install -lib install时会提示出现错误：哪些目录没有被创建，根据提示，创建相应的目录即可。     #cp libjpeg.so /usr/local/arm/2.95.3/arm-linux/lib 在/etc/profile中添加：                   PATH=/usr/local/arm/2.95.3/bin:$PATH       编译zlib-1.2.3.tar.gz    tar -xzvf zlib-1.2.3.tar.gz 
export CC=arm-linux-gcc
./configure -prefix=/usr/local/arm/2.95.3/arm-linux 修改Makefile
AR=arm-linux-ar -rc
RANLIB=arm-linux-ranlib

make make install (这步不走，出现cannot find -lz的错误）
   1.arm-linux-g++命令找不到: 设置环境变量 export PATH=/usr/local/arm/2.95.3/bin:$PATH
2.找不到uuid.h和cannot find -lqtopia的问题; 到网上下载一个e2fsprogs-1.35.tar.gz包，然后执行： #tar xzf e2fsprogs-1.35.tar.gz
#cd e2fsprogs-1.35
#./configure -host=arm-linux -with-cc=arm-linux-gcc -with-linker=arm-linux-ld -enable-elf-shlibs -prefix=/usr/local/arm/2.95.3/arm-linux
#make
#make install lib/uuid/ 将e2fsprogs-1.35/lib/目录下uuid的文件夹复制到/armsys2410/qt_arm/qtopia/include下
将e2fsprogs-1.35/lib/中的libuuid.a libuuid.so libuuid..so.1 libuuid.so.1.2复制到/armsys2410/qt_arm/qtopia/lib下。
3.lib/libuuid.so.1:could not read symbols: 将e2fsprogs-1.35/lib/中的libuuid.a libuuid.so libuuid..so.1 libuuid.so.1.2复制到/usr/local/arm/2.95.3/arm-linux/lib下.
4.tmake 版本至少需要1.11的问题: 设置环境变量 export PATH=$TMAKEDIR/bin:$PATH
5./usr/local/arm/2.95.3/arm-linux/bin/ld: cannot find -ljpeg 下载jpegsrc.v6b.tar.gz到qtarm目录并解压,进入目录jpeg-6b:
./configure --enable-shared
make   (得到libtools程序)
./configure --enable-shared
修改生成的Makefile文件:
prefix = /qtarm/qt (qte的路径)
CC =/usr/local/arm/2.95.3/bin/arm-linux-gcc
AR =/usr/local/arm/2.95.3/bin/arm-linux-ar rc
AR2=/usr/local/arm/2.95.3/bin/arm-linux-ranlib
cp jconfig.doc jconfig.h
mkdir -p /qtarm/qt/man/man1
make
生成的libjpeg.so在.libs下,将libjpeg.so拷贝到/usr/local/arm/2.95.3/bin/arm-linux/lib下.
 checking for libz...的问题：安装zlib-1.2.3.tar.gz,根据错误提示，将zlib.h和zconf.h拷到相应的目录。
另：编译出现问题修改后要make clean，再configure后make。

热门文章