嵌入式

编译Tiny-X for arm

2019-07-13 05:33发布

站内文章 / 嵌入式Linux
17695 0 1774
5月 30

編譯 Tiny-X for ARM (未成功…)

Compile Add comments Tiny-Ｘ是標準X-windows系統的簡化版，去掉了許多對設備的檢測過程，無需設置顯示卡Driver,很容易對各種不同硬件進行移植。Tiny-Ｘ專為嵌入式開發，適合用作嵌入式linux的GUI系統。Tiny-Ｘ圖形系統是由SuSE贊助的，開發人員是XFree86的核心成員Keith Packard。目前TinyX是XFree86自帶的編譯模式之一，只要通過修改編譯選項，就能編譯生成Tiny-X。 作為XFree86 4.0（ftp://ftp.xfree86.org/pub/XFree86/4.0）的子集，性能和穩定性都非常好，適合內存資源比較少的系統的X系統，它是以 XFree86為基準，所以構置或設定的方式與 xfree86 是相同的。一般的X Server都太過於龐大，因此Keith Packard就以XFree86為基礎，精簡了不少東西而成Tiny X Server，它的體積可以小到幾百Kb而已，非常適合應用於嵌入式環境。TinyX象X Window系統一樣採用標準的Client/Server體系結構，如下圖所示： http://bbs.ednchina.com/BLOG_ARTICLE_5770.HTM sudo apt-get install gcc glibc-6 build-essential
sudo apt-get install autoconf
sudo apt-get install linux-hearders-2.6.17-10-generic
sudo apt-get install bison flex
sudo apt-get install zlib1g-dev      #好像zlib-dev,zlib1-dev都被廢棄了
sudo apt-get install libexpat1-dev   #安裝開發包，不是安裝expat
sudo apt-get install libfontconfig-dev   #安裝開發包，不是安裝fontconfig
apt-get install libtool g++ libpam0g-dev libpng12-dev 下載freetype-2.2.1.tar.gz  libpng-1.2.16.tar.bz2  libjpeg-6b.tar.gz   zlib- 1.2.3.tar.gz --- 安裝zlib
tar zxvf zlib-1.2.3.tar.gz
cd zlib-1.2.3
make distclean
./configure --shared --prefix=/usr
make
make install
cd .. --- 安裝libpng
tar jxvf libpng-1.2.16.tar.bz2
cd libpng-1.2.16
./configure --host=arm-linux --prefix=/usr
make
make install --- 安裝jpeg-8 //http://www.ijg.org/files/
tar zxvf jpegsrc.v8.tar.gz
cd jpeg-8
./configure --host=arm-linux --prefix=/usr --enable-shared --enable-static
make
make install --- 安裝freetype //http://www.freetype.org/download.html
tar zxvf freetype-2.4.2.tar.gz
cd freetype
./configure --prefix=/usr --host=arm-linux
sudo make install
make
make install cp /usr/src/linux-headers-3.2.0-29-generic-pae/include/config/i2o/config.h /usr/include/linux/ cd xc/include/
http://pkgs.fedoraproject.org/repo/pkgs/termcap/ ncurses 交叉編譯./configure
--prefix=$PWD/bulid
--host=arm-linux
--target=arm-linux
--with-build-cc=cc
--with-build-cpp=cpp
--with-shared
--with-normal
make
make install
http://ftp.gwdg.de/pub/xfree86/XFree86/4.8.0/source/
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11 和 xc在同一個目錄下建立一個文件夾
mkdir arm
cd arm
lndir ../xc/ 2cross.def和host.def配置文件
在xc/config/cf下建立cross.def和host.def文件如下 host.def #define KDriveXServer YES
#define TinyXServer YES
#define XfbdevServer YES
#define CrossCompiling YES
#define ProjectRoot /opt/FriendlyARM/mini6410/linux/Tinyx
#define NothingOutsideProjectRoot YES
#define HasFreetype2 NO
#define HasFontconfig NO
#define HasLibpng NO
#define HasZlib NO
#define HasExpat NO
#define BuildXprintClients NO
#define TouchScreen YES
#define HasTsLib YES
#define BuildDocs NO
#define BuildXF86DRI NO
#define BuildGlxExt NO
#define BuildOSMesaLib NO
#define BuildLowMem NO
#define BuildIPv6 NO
#define HasMTRRSupport NO
#define UseX86Emu NO
#define XF86INT10_BUILD X86INT10_STUB
#define BuildAppgroup NO
#define BuildDBE NO
#define BuildLBX NO
#define BuildFonts YES
#undef BuildXF86RushExt
#define BuildXF86RushExt NO
#undef BuildRender
#define BuildRender YES #define UseRgbTxt NO
#define BuildFontServer NO
#define BuildClients NO
#define BuildFonts YES
#undef BuildXF86RushExt
#define BuildXF86RushExt NO
#undef BuildRender
#define BuildRender YES
#define UseRgbTxt YES
#define BuildFontServer NO
#define OmitSnfSupport YES
#define XdecMultiDepthServer NO
#define XsunServer NO
#define Xsun24Server NO
#define XsunMonoServer NO
#define XsunLynxServer NO
#define XSavageServer NO
#define XIgsServer NO
#define XTridentServer NO
#define XchipsServer NO
#define Xmach64Server NO
#define Xi810Server NO
#define XSis530Server NO
#define XTrioServer NO
#define XipaqServer NO
#define XTS300Server NO
#define XItsyServer NO
#define XvesaServer NO
#define XDarwinServer NO
#define XF86CardDrivers fbdev
#define XInputDrivers mouse keyboard cross.def #undef Arm32Architecture
#undef i386Architecture
#undef Arm32Architecture
#undef Arm32Architecture
#define Arm32Architecture
#undef OptimizedCDebugFlags
#define OptimizedCDebugFlags -Os
#define ServerCDebugFlags -Os
#undef StandardDefines
#define StandardDefines -Dlinux -D__arm__ -D_POSIX_SOURCE
-D_BSD_SOURCE -D_GNU_SOURCE -DX_LOCALE
#undef CcCmd
#define StdIncDir /opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/include
#define PreIncDir /opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/include
#undef PostIncDir
#define PostIncDir/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/include
#define CcCmd arm-linux-gcc
#undef HasCplusplus
#define HasCplusplus NO
#undef CplusplusCmd
#define CplusplusCmd NO
#define DoRanlibCmd YES
#define RanlibCmd arm-linux-ranlib
#undef ExtraLoadFlags
#define ExtraLoadFlags
#define FbNoPixelAddrCode
#undef TermcapLibrary
#define TermcapLibrary -L../lib -lncurses #define NCursesLibName -L../lib -lncurses
#undef LdPostLib
#undef LdCmd
#define LdCmd arm-linux-ld
#undef ExtensionOSDefines
#define ExtensionOSDefines
#define ServerXdmcpDefines
#define GzipLibrary -L../lib -lz
#include 3修改部分文件
‧ 編輯armtinyx/programs/Xserver/hw/xfree86/common/compiler.h，刪除outb之類的
空函數。 第1435行開始
static __inline__ void
outb(unsigned short port, unsigned char val)
{
}
static __inline__ void
outw(unsigned short port, unsigned short val)
{
}
static __inline__ void
outl(unsigned short port, unsigned int val)
{
}
static __inline__ unsigned int
inb(unsigned short port)
{
return 0;
}
static __inline__ unsigned int
inw(unsigned short port)
{
return 0;
}
static __inline__ unsigned int
inl(unsigned short port)
{
return 0;
} ‧ 修改xc/programs/Xserver/hw/xfree86/fbdevhw/fbdevhw.c
刪掉#include "asm/page.h" /* #define for PAGE_* */
添加# define PAGE_MASK (~(getpagesize() - 1))
‧ 修改xc/programs/Xserver/hw/tinyx/linux/tslib.c
修改成
if (n == 1)
{
if (event.pressure)
{
/*
* HACK ATTACK. (static global variables used !)
* Here we test for the touch screen driver actually being on the
* touch screen, if it is we send absolute coordinates. If not,
* then we send delta's so that we can track the entire vga screen.
*/

‧ 修改xc/config/cf/X11.tmpl,使其生成靜態庫文件
將
#ifndef NormalLibFS
#define NormalLibFS (!SharedLibFS | ForceNormalLib)
#endif
等之類修改成
#ifndef NormalLibFS
#define NormalLibFS YES
#endif
‧ 修改xc/programs/Xserver/hw/xfree86/common下的
xf86Configure.c
添加#define PATH_MAX 1024
‧ 修改/usr/local/arm/3.4/bin
將arm-linux-gcc,arm-linux-g++,arm-linux-ar,arm-linux-ld 都ln到
/usr/local/arm/3.4/arm-linux/bin下
ps: /usr/local/arm/3.4 指的是交叉編譯器的位置 4-加入触摸屏支持
(1)在host.def中应加入如下语句：
#define TouchScreen YES
#define HasTsLib YES
(2)并将tslib-1.0/src/tslib.h文件拷入armtinyx/programs/Xserver/hw/tinyX/linux（解决找不到tslib.h错误）
(3)将交叉编译好的tslib的lib文件夹（几个.so文件）拷贝到交叉编辑环境的arm-linux/lib下（解决ld找不到-lts错误）
注意：编译tslib的交叉编译器必须也要和编译tinyx一样是带软浮点的，不然执行上步会报出浮点不一样的错误
(4)在armtinyx/programs/Xserver/hw/tinyx/tinyx.h文件里添加
#define TOUCHSCREEN
(5)在/armtinyx/programs/Xserver/hw/tinyX/linux/tslib.c中对触摸屏的查找是根据TsNames数组来进行的，如果没有你的开发板上/dev下的触摸屏设备节点的话，将其添加到TsNames数组里。
static char *TsNames[] = {
  "/dev/event0",//我的/dev下的设备结点
  "/dev/ts",
  "/dev/touchscreen/0",
};
5-在/armtinyx/lib/X11/Imakefile
#if (BuildServersOnly || !BuildX11Lib) && !XnestServer && !BuildGLXLibrary && !BuildClients && !XdmxServer
修改为
#if (BuildServersOnly || !BuildX11Lib) && !XnestServer && !BuildGLXLibrary && !BuildClients && !XdmxServer && !TinyXServer
6-编译
make World
make install
ln -s /usr/local/arm/3.4/include /usr/local/arm/3.4/arm-linux/
‧ 在運行一會後，在另外一個term中運行下面語句
cd programs/Xserver/os
make lbxio.o 4編譯安裝
make  World CROSSCOMPILEDIR=/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/bin
ftconfig.h), line 84: #error "Unsupported size of `int' type!"
vim ./lib/freetype2/freetype/config/ftconfig.h
将 (71行)
#define FT_CHAR_BIT  CHAR_BIT
改为
#define FT_CHAR_BIT 8
XF86DGA.c:22:40: fatal error: asm/page.h: No such file or directory
OS.c:14:42: fatal error: asm/page.h: No such file or directory
ln -s /usr/src/linux-headers-3.2.0-29/include/asm-generic/page.h /usr/include/asm-generic/
vim lib/Xxf86dga/XF86DGA.c
vim lib/Xaw/OS.c tslib.c: In function 'TsRead':
tslib.c:86:10: error: 'KdTsCurScreen' undeclared (first use in this function)
tslib.c:86:10: note: each undeclared identifier is reported only once for each function it appears in
tslib.c:86:27: error: 'KdTsPhyScreen' undeclared (first use in this function) vim programs/Xserver/hw/tinyx/linux/tslib.c
加上下列宣告
extern int KdTsCurScreen;
extern int KdTsPhyScreen; 看到這個算是編譯成功 ~~呼呼 Full build of XFree86 version 4.8.0 (15 December 2008) complete. 删掉#include "asm/page.h" /* #define for PAGE_* */
添加#define PAGE_MASK (~(getpagesize() - 1))
make install 在programs/Xserver 下生成了 Xfbdev 5運行TinyX
複製/usr/share/fonts/X11/75dpi下的字體到TinyX/lib/X11/fonts/75dpi下
運行 未成功…有空再重新編一下~
./Xfbdev -fp lib/X11/fonts/75dpi -fn -adobe-courier-bold-r-normal--8-80-75-75-m-50-iso8859-1 -fc -adobe-times-medium-i-normal—8-80-75-75-p-42-iso8859-1 ./Xfbdev -fp lib/X11/fonts/75dpi -fn -misc-fixed-medium-r-normal--18-120-100-100-c-90-iso8859-1 -fc -misc-fixed-medium-r-normal--18-120-100-100-c-90-iso8859-1 Xfbdev -fp /usr/share/fonts -fn -misc-fixed-medium-r-normal--18-120-100-100-c-90-iso8859-1 -fc -misc-fixed-medium-r-normal--18-120-100-100-c-90-iso8859-1 即可
在/home/zhepeng/TinyX/lib/X11添加rgb文件   http://bingfeng.blog.edu.cn/2007/110139.html http://blog.chinaunix.net/uid-136451-id-2879367.html http://biancheng.dnbcw.info/linux/355450.html http://bbs.chinaunix.net/thread-2102154-1-1.html http://bingfeng.blog.edu.cn/2007/110128.html

相關文章 :

Compile

热门文章