本文介绍如何通过CCS5.x对dm81xx进行调试

1.环境：

CCS5.3     dm8168 支持的设备：

• DM8168 or C6A8168 board 
• Supported Emulators
  • XDS560 V2 System Trace Emulator
  • XDS560 PCI Rev D Emulator (20 pin connector)
  • Blackhawk USB 560-M Emulator (Rev D equivalement with 20 pin connector)
  • Spectrum Digital 510 USB Emulator 

2.步骤

硬件连接请参照另一篇博客：http://blog.csdn.net/guo8113/article/details/23262839 dm8168 gel文件下载：http://download.csdn.net/detail/guo8113/7188519

连接后选择菜单栏Scripts ->TI816X CPU BRINGUPS,and select c674x 在图中C674x核上选择右键连接，即可连接上，然后选择run->loadprogram加载程序！
英文介绍： Procedure to connect to the DSP on C6A8168/DM8148/C6A8148/DM8148 is described below: 1. After starting CCSv4 or CCSv5, create new target configuration. Select XDS510USB/XDS560USB emulator and device as TI816X/TI4X based on what is applicable. Note:

• Select TI816X for C6A8168 and DM8168
• Select TI814X for C6A8148 and DM8148

2. Launch debug session with this configuration. Once you see the emulator connection. You can connect to the cortex-A8. 3. Then go to menu option Tools->Gel File and right click on the gel files window and load the gel file that you can download from here

• TI814X GEL

Note:

• The GEL file for TI816x is for a DDR3 EVM and for specific revision. In order to use this on the DDR2 EVM set the DDR2 Macro at the Top of the Gel file to 1 and DDR3 Macro to 0. For revision other than the one specified please contact TI representative.
• The GEL file for TI814x is within the Diagnostics Software package found on the Mistral web page

4. For DM8168, go to Menu options Scripts ->TI816X CPU BRINGUPS,and select c674x 参考：http://www.cnblogs.com/gune/p/3285439.html http://processors.wiki.ti.com/index.php/Connecting_to_DSP_on_C6A8168,_DM8168,_DM8148
转载请注明：http://blog.csdn.net/guo8113/article/details/23624051