浅析android下如何通过jni监控wifi网络连接、dhcpcd执行和power电源控制

2019-07-14 02:03发布

浅析android下如何通过jni监控wifi网络连接、dhcpcd执行和power电源控制

=============================================================================================================
libs/android_runtime/android_net_wifi_Wifi.cpp
部分jni接口
static JNINativeMethod gWifiMethods[] = {
    { "loadDriver", "()Z", (void *)android_net_wifi_loadDriver },
    { "setPowerModeCommand", "(I)Z", (void*) android_net_wifi_setPowerModeCommand },//电源管理
    { "connectToSupplicant", "()Z", (void *)android_net_wifi_connectToSupplicant },
    { "waitForEvent", "()Ljava/lang/String;", (void*) android_net_wifi_waitForEvent },
    { "disconnectCommand", "()Z", (void *)android_net_wifi_disconnectCommand },
    ...
};
int register_android_net_wifi_WifiManager(JNIEnv* env)
{
    ...
    return AndroidRuntime::registerNativeMethods(env,
            WIFI_PKG_NAME, gWifiMethods, NELEM(gWifiMethods));//登记jni
}
libs/android_runtime/AndroidRuntime.cpp
static const RegJNIRec gRegJNI[] = {
    ...
    REG_JNI(register_android_net_wifi_WifiManager),
    ...
};
int AndroidRuntime::startReg(JNIEnv* env)
{
    ...
    register_jni_procs(gRegJNI, NELEM(gRegJNI), env);
    ...
}
AndroidRuntime::start
=>startReg(env)即调用方法int AndroidRuntime::startReg(JNIEnv* env)
=============================================================================================================
wifi_load_driver
wifi_start_supplicant
=>ensure_config_file_exists
//检查/data/misc/wifi/wpa_supplicant.conf文件是否存在,如果不存在,那么从/system/etc/wifi/wpa_supplicant.conf动态拷贝一份
android_net_wifi_connectToSupplicant
=>wifi_connect_to_supplicant
=>
    ctrl_conn = wpa_ctrl_open(ifname);
    monitor_conn = wpa_ctrl_open(ifname);
    wpa_ctrl_attach(monitor_conn);

android_net_wifi_waitForEvent
=>wifi_wait_for_event
=>wpa_ctrl_recv(monitor_conn, buf, &nread);
=>recv(ctrl->s, reply, *reply_len, 0);//阻塞等待wpa_supplicant的netlink数据过来
=>如果接收的buf数据区,buf[0]'<',那么说明有level级别信息,所以将'<'...'>'数据剔除,然后wifi_wait_for_event函数返回[luther.gliethttp].
java/android/android/net/wifi/WifiMonitor.java
public class WifiMonitor {
    ...
    public void startMonitoring() {
        new MonitorThread().start();//启动java线程
    }
    class MonitorThread extends Thread {
        public MonitorThread() {
            super("WifiMonitor");
        }
    public void run() {
        for (;;) {
            ensureSupplicantConnection();//=>WifiNative.connectToSupplicant调用jni函数android_net_wifi_connectToSupplicant
            String eventStr = WifiNative.waitForEvent();//=>调用jni函数android_net_wifi_waitForEvent
            //private static final int CONNECTED = 1;
            //private static final int DISCONNECTED = 2;
            //private static final String eventPrefix = "CTRL-EVENT-";
            //private static final int eventPrefixLen = eventPrefix.length();
            //private static final String connectedEvent = "CONNECTED";
            //private static final String disconnectedEvent = "DISCONNECTED";
            String eventName = eventStr.substring(eventPrefixLen);//去掉"CTRL-EVENT-"字符串
            int nameEnd = eventName.indexOf(' ');//找到随后的空格位置,这在wpa_supplicant发送时
//#define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "中,已经内置空格了.
                if (nameEnd != -1)
                    eventName = eventName.substring(0, nameEnd);
            int event;
                if (eventName.equals(connectedEvent))//检测netlink过来的字符串action类型
                    event = CONNECTED;
                else if (eventName.equals(disconnectedEvent))
                    event = DISCONNECTED;
    ...
            int ind = eventStr.indexOf(" - ");//CTRL-EVENT-CONNECTED - Connection to ...
                    if (ind != -1)
                        eventData = eventStr.substring(ind + 3);
//剔除前导控制字符,将" - "后面的描述字符串作为真实数据,继续处理
    ...
            if (event == STATE_CHANGE) {
                    handleSupplicantStateChange(eventData);
                } else if (event == DRIVER_STATE) {
                    handleDriverEvent(eventData);
                } else {
                    handleEvent(event, eventData);//对于CONNECTED和DISCONNECTED等netlink事件将执行此操作来处理[luther.gliethttp]
                    // If supplicant is gone, exit the thread
                    if (event == TERMINATING) {
                        break;
                    }
                }
    ...
            void handleEvent(int event, String remainder) {
            switch (event) {
                case DISCONNECTED:
                    handleNetworkStateChange(NetworkInfo.DetailedState.DISCONNECTED, remainder);
                    break;

                case CONNECTED:
                    handleNetworkStateChange(NetworkInfo.DetailedState.CONNECTED, remainder);//控制界面显示
                    break;
    ...
}
public class WifiStateTracker extends NetworkStateTracker {
    ...
        public void startEventLoop() {
        mWifiMonitor.startMonitoring();//启动上面的MonitorThread线程
    }
    ...
}
java/services/com/android/server/WifiService.java
public class WifiService extends IWifiManager.Stub {
    ...
    private boolean setWifiEnabledBlocking(boolean enable) {
        final int eventualWifiState = enable ? WIFI_STATE_ENABLED : WIFI_STATE_DISABLED;
            ...
            if (enable) {
            if (WifiNative.loadDriver()) {
                Log.e(TAG, "Failed to load Wi-Fi driver.");
                updateWifiState(WIFI_STATE_UNKNOWN);
                return false;
            }
            if (WifiNative.startSupplicant()) {
                WifiNative.unloadDriver();
                Log.e(TAG, "Failed to start supplicant daemon.");
                updateWifiState(WIFI_STATE_UNKNOWN);
                return false;
            }
            mWifiStateTracker.startEventLoop();
//启动MonitorThread线程,等待wpa_supplicant将netlink数据转发过来,然后根据netlink动作类型,进一步影响界面显示[luther.gliethttp].
        }
    ...
}
java/android/android/net/wifi/WifiStateTracker.java
电源管理
private void handleConnectedState() {
    ...
    mDhcpTarget.obtainMessage(EVENT_DHCP_START).sendToTarget();//传递到下面的handleMessage方法
    ...
}
public void onChange(boolean selfChange) {
    ...
    handleConnectedState();
    ...
}
public class WifiStateTracker extends NetworkStateTracker {
    ...
    public void handleMessage(Message msg) {
        switch (msg.what) {
            case EVENT_SUPPLICANT_CONNECTION:
            case EVENT_NETWORK_STATE_CHANGED:
                handleConnectedState();//调用
    ...
    private class DhcpHandler extends Handler {

        private Handler mTarget;

        public DhcpHandler(Looper looper, Handler target) {
            super(looper);
            mTarget = target;
        }

        public void handleMessage(Message msg) {
            int event;
        //private static final int DRIVER_POWER_MODE_AUTO = 0;
        //private static final int DRIVER_POWER_MODE_ACTIVE = 1;
            switch (msg.what) {
                case EVENT_DHCP_START:
                    synchronized (this) {
                        WifiNative.setPowerModeCommand(DRIVER_POWER_MODE_ACTIVE);//设置电源模式,调用android_net_wifi_setPowerModeCommand
                    }
                    Log.d(TAG, "DhcpHandler: DHCP request started");
//libs/android_runtime/android_net_NetUtils.cpp
//static JNINativeMethod gNetworkUtilMethods[] = {
//{ "runDhcp", "(Ljava/lang/String;Landroid/net/DhcpInfo;)Z", (void *)android_net_utils_runDhcp },
// ...
//};

                    if (NetworkUtils.runDhcp(mInterfaceName, mDhcpInfo)) {//执行dhcp申请ip地址操作
                        event = EVENT_INTERFACE_CONFIGURATION_SUCCEEDED;
                        if (LOCAL_LOGD) Log.v(TAG, "DhcpHandler: DHCP request succeeded");
                    } else {
                        event = EVENT_INTERFACE_CONFIGURATION_FAILED;
                        Log.i(TAG, "DhcpHandler: DHCP request failed: " +
                            NetworkUtils.getDhcpError());
//如果dhcpcd分配ip失败,那么Message.obtain(mTarget, event).sendToTarget();将执行
//WifiNative.disconnectCommand();即:static JNINativeMethod gWifiMethods[] = {
//android_net_wifi_disconnectCommand发送"DISCONNECT"字符串[luther.gliethttp]
//然后在wpa_supplicant服务端执行wpa_supplicant_ctrl_iface_process
//wpa_supplicant_disassociate
                    }
                    synchronized (this) {
                        WifiNative.setPowerModeCommand(DRIVER_POWER_MODE_AUTO);
                    }
                    Message.obtain(mTarget, event).sendToTarget();
                    break;
            }
        }
    }
    ...
    /**
     * Send the tracker a notification that a connection to the supplicant
     * daemon has been established.
     */

//在上面的public class WifiMonitor=>ensureSupplicantConnection
//=>
//while (!supplicantConnected) {
// boolean connected;
//synchronized (mWifiStateTracker) {
//connected = WifiNative.connectToSupplicant();//如果没有连接成功,那么while循环尝试,直到尝试成功,或者定义了oneShot,仅一次尝试
//=>mWifiStateTracker.notifySupplicantConnection();//如果WifiNative.connectToSupplicant()成功,那么将执行
//mWifiStateTracker.notifySupplicantConnection();的调用.
    void notifySupplicantConnection() {//向对象发送message
        Message.obtain(this, EVENT_SUPPLICANT_CONNECTION).sendToTarget();
    }
    void notifyStateChange(SupplicantState newState) {
        Message.obtain(this, EVENT_SUPPLICANT_STATE_CHANGED, newState).sendToTarget();
    }
    ...
}
static jboolean android_net_wifi_setPowerModeCommand(JNIEnv* env, jobject clazz, jint mode)
{
    char cmdstr[256];

    sprintf(cmdstr, "DRIVER POWERMODE %d", mode);
    return doBooleanCommand(cmdstr, "OK");
}
android_net_wifi_setPowerModeCommand
=>doBooleanCommand
=>doCommand
=>wifi_command
=>wifi_send_command
=>wpa_ctrl_request
=>send给wpa_supplicant
然后wpa_supplicant将做如下接收操作:
system/extra/wpa_supplicant/main.c
=>wpa_supplicant_add_iface
=>wpa_supplicant_init_iface2
=>wpa_supplicant_ctrl_iface_init
=>注册ctrl_conn控制端口和monitor_conn监听端口的处理函数
  eloop_register_read_sock(priv->sock, wpa_supplicant_ctrl_iface_receive, wpa_s, priv);//ctrl_conn端口的handler处理函数
  wpa_msg_register_cb(wpa_supplicant_ctrl_iface_msg_cb);//monitor_conn端口的回调处理函数,处理netlink数据到所有monitor_conn监听端口
=>wpa_supplicant_ctrl_iface_receive//对于unix通信方式
=>wpa_supplicant_ctrl_iface_process
=>如果wpa_cli发送的是wpa_cli driver xxx形式的命令,那么调用这个函数
if (os_strncmp(buf, "DRIVER ", 7) == 0) {//掠过前7个,直接将命令传过去
reply_len = wpa_supplicant_driver_cmd(wpa_s, buf + 7, reply, reply_size);
=>wpa_supplicant_driver_cmd
=>wpa_drv_driver_cmd
=>自定义DRIVER扩展处理函数,所以对于java传递过来的power电源管理命令,wpa_drv_driver_cmd将收到"POWERMODE 0"或者"POWERMODE 1"字符串[luther.gliethttp]
=============================================================================================================
jni
=>runDhcp
=>android_net_utils_runDhcp
libs/netutils/dhcp_utils.c
=>dhcp_do_request
=>
    static const char DAEMON_NAME[] = "dhcpcd";
    static const char DAEMON_PROP_NAME[] = "init.svc.dhcpcd";
    static const char DHCP_PROP_NAME_PREFIX[] = "dhcp";
    const char *ctrl_prop = "ctl.start";
    const char *desired_status = "running";
    snprintf(result_prop_name, sizeof(result_prop_name), "%s.%s.result",
            DHCP_PROP_NAME_PREFIX,
            interface);
    property_set(result_prop_name, "");//设置dhcp.eth0.result="";等到成功完成dhcp之后,
    property_set(ctrl_prop, DAEMON_NAME);//向名字为dhcpcd的service,发送"ctrl.start"启动命令字,该service在init.rc中
//init.rc中dhcpcd服务进程命令字
//service dhcpcd /system/bin/dhcpcd eth0
// disabled
// oneshot
    wait_for_property(DAEMON_PROP_NAME, desired_status, 10);
//init.c=>init进程
//=>handle_property_set_fd因为是"ctrl.start"命令字,所以调用handle_control_message处理控制信息
//=>handle_control_message
//=>msg_start
//=>
// struct service *svc = service_find_by_name(name);
// service_start(svc);//启动svc,即执行:/system/bin/dhcpcd eth0
//=>service_start
//=>pid = fork();
// if(pid == 0)execve(svc->args[0], (char**) svc->args, (char**) ENV);子进程执行execve运行/system/bin/dhcpcd,参数为eth0
//=>否则父进程,即init进程将
//=>notify_service_state(svc->name, "running");设置该svc的状态prop
// snprintf(pname, sizeof(pname), "init.svc.%s", name);
// property_set(pname, state);//所以这样上面wait_for_property(DAEMON_PROP_NAME, desired_status, 10);也才能够正常pass[luther.gliethttp].
    wait_for_property(result_prop_name, NULL, 15);//等待dhcp.eth0.result=非空
======