新手求助。我用的是STM32F103ZG，电路图中用到了TIM9测PWM输入的高电平，但是在固件库V3.5中定义TIM9的中断优先级时，运行出错 - 平头弟

新手求助。我用的是STM32F103ZG，电路图中用到了TIM9测PWM输入的高电平，但是在固件库V3.5中定义TIM9的中断优先级时，运行出错

2019-07-21 03:22发布

站内问答 / STM32/STM8

8507 11

main中：       //确定定时器9溢出优先级
      NVIC_InitStructure.NVIC_IRQChannel =TIM9_IRQn;
      NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; //先占级（待定）
      NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;//次占级（待定）
      NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
      NVIC_Init(&NVIC_InitStructure);
出错信息：
..Usermain.c(555): error:  #20: identifier "TIM9_IRQn" is undefined

所用芯片：STM32F103ZG。

而且在startup_stm32f10x_hd.s中找不到为TIM9开辟中断地址的语句。请问是不是TIM9的中断不能用？该如何处理？

; External Interrupts
            DCD    WWDG_IRQHandler          ; Window Watchdog
            DCD    PVD_IRQHandler          ; PVD through EXTI Line detect
            DCD    TAMPER_IRQHandler       ; Tamper
            DCD    RTC_IRQHandler          ; RTC
            DCD    FLASH_IRQHandler          ; Flash
            DCD    RCC_IRQHandler          ; RCC
            DCD    EXTI0_IRQHandler          ; EXTI Line 0
            DCD    EXTI1_IRQHandler          ; EXTI Line 1
            DCD    EXTI2_IRQHandler          ; EXTI Line 2
            DCD    EXTI3_IRQHandler          ; EXTI Line 3
            DCD    EXTI4_IRQHandler          ; EXTI Line 4
            DCD    DMA1_Channel1_IRQHandler ; DMA1 Channel 1
            DCD    DMA1_Channel2_IRQHandler ; DMA1 Channel 2
            DCD    DMA1_Channel3_IRQHandler ; DMA1 Channel 3
            DCD    DMA1_Channel4_IRQHandler ; DMA1 Channel 4
            DCD    DMA1_Channel5_IRQHandler ; DMA1 Channel 5
            DCD    DMA1_Channel6_IRQHandler ; DMA1 Channel 6
            DCD    DMA1_Channel7_IRQHandler ; DMA1 Channel 7
            DCD    ADC1_2_IRQHandler       ; ADC1 & ADC2
            DCD    USB_HP_CAN1_TX_IRQHandler  ; USB High Priority or CAN1 TX
            DCD    USB_LP_CAN1_RX0_IRQHandler ; USB Low  Priority or CAN1 RX0
            DCD    CAN1_RX1_IRQHandler       ; CAN1 RX1
            DCD    CAN1_SCE_IRQHandler       ; CAN1 SCE
            DCD    EXTI9_5_IRQHandler       ; EXTI Line 9..5
            DCD    TIM1_BRK_IRQHandler       ; TIM1 Break
            DCD    TIM1_UP_IRQHandler       ; TIM1 Update
            DCD    TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
            DCD    TIM1_CC_IRQHandler       ; TIM1 Capture Compare
            DCD    TIM2_IRQHandler          ; TIM2
            DCD    TIM3_IRQHandler          ; TIM3
            DCD    TIM4_IRQHandler          ; TIM4
            DCD    I2C1_EV_IRQHandler       ; I2C1 Event
            DCD    I2C1_ER_IRQHandler       ; I2C1 Error
            DCD    I2C2_EV_IRQHandler       ; I2C2 Event
            DCD    I2C2_ER_IRQHandler       ; I2C2 Error
            DCD    SPI1_IRQHandler          ; SPI1
            DCD    SPI2_IRQHandler          ; SPI2
            DCD    USART1_IRQHandler       ; USART1
            DCD    USART2_IRQHandler       ; USART2
            DCD    USART3_IRQHandler       ; USART3
            DCD    EXTI15_10_IRQHandler    ; EXTI Line 15..10
            DCD    RTCAlarm_IRQHandler       ; RTC Alarm through EXTI Line
            DCD    USBWakeUp_IRQHandler    ; USB Wakeup from suspend
            DCD    TIM8_BRK_IRQHandler       ; TIM8 Break
            DCD    TIM8_UP_IRQHandler       ; TIM8 Update
            DCD    TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
            DCD    TIM8_CC_IRQHandler       ; TIM8 Capture Compare
            DCD    ADC3_IRQHandler          ; ADC3
            DCD    FSMC_IRQHandler          ; FSMC
            DCD    SDIO_IRQHandler          ; SDIO
            DCD    TIM5_IRQHandler          ; TIM5
            DCD    SPI3_IRQHandler          ; SPI3
            DCD    UART4_IRQHandler          ; UART4
            DCD    UART5_IRQHandler          ; UART5
            DCD    TIM6_IRQHandler          ; TIM6
            DCD    TIM7_IRQHandler          ; TIM7
            DCD    DMA2_Channel1_IRQHandler ; DMA2 Channel1
            DCD    DMA2_Channel2_IRQHandler ; DMA2 Channel2
            DCD    DMA2_Channel3_IRQHandler ; DMA2 Channel3
            DCD    DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。

该问题目前已经被作者或者管理员关闭, 无法添加新回复

11条回答

1楼-- · 2019-07-21 06:10

F103就没有TIM9,你折腾啥?

2楼-- · 2019-07-21 11:18

精彩回答 2 元偷偷看……

3楼-- · 2019-07-21 17:02

正点原子发表于 2016-1-10 14:51
F103就没有TIM9,你折腾啥?

原子哥咋还犯这种低级错误，STM32F103ZG不仅有TIM9，连TIM10，TIM11,TIM12都有，我可以把ST公司的参考资料发给你，让你鉴定。

4楼-- · 2019-07-21 17:31

http://www.st.com/st-web-ui/stat ... eet/CD00253742.pdf [/url]

5楼-- · 2019-07-21 19:33

上面是ST公司的参考资料，可以鉴定一下。

6楼-- · 2019-07-21 20:28

正点原子发表于 2016-1-10 14:51
F103就没有TIM9,你折腾啥?

http://www.st.com/st-web-ui/stat ... heet/CD00253742.pdf http://www.st.com/st-web-ui/stat ... heet/CD00253742.pdf
ST公司的参考资料，请原子哥鉴定

一周热门更多>

相关问题

相关文章