我的板子连不上，出现以下情况；Error connecting to the target:
Error 0x80000242/-1143
Fatal Error during: Memory, Initialization, OCS,
The memory at 0x000000BE continually indicated it was 'not ready'
All memory operations currently in progress were aborted in order
to regain control of the processor.
This is considered a catastrophic event, but the debugger should
still be able to access memory and CPU registers.
System state has been altered.  It is strongly advised
that the processor should be reset before resuming execution,


Sequence ID: 0
Error Code: -1143
Error Class: 0x80000242
I/O Port = 240

Board Name: C5502 XDS510 Emulator
Cpu Name: CPU_1

Abort:
Close Code Composer Studio.
Retry:
Try to connect to the target again.
Cancel:
Remain disconnected from the target