本帖最后由 bruceleegyx 于 2017-7-5 10:22 编辑

能识别芯片，但是到最后一步下载的时候出错了，弹出下图那个提示框。我的下载模式没选错，芯片我是64K的，选的是128K的，因为列表中看不到64K的，不过我之前选的128K的也没影响。
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled Nov 28 2014 13:44:46
Hardware: V8.00
S/N : 87461523
Feature(s) : RDI, FlashBP, FlashDL, JFlash, GDBFull

* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003

Target info:
------------
Device: STM32F103C8
VTarget = 3.306V
State of Pins:
TCK: 0, TDI: 0, TDO: 1, TMS: 1, TRES: 1, TRST: 1
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info:   FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints:          4
JTAG speed: 4000 kHz

Erase Done.
Programming Failed!