STM32F4 HID demo + 基于libusb-win32的上位机程序-第4页回答

STM32

STM32F4 HID demo + 基于libusb-win32的上位机程序

2019-12-11 18:19发布

站内问答 / STM32/STM8

3225 32

本帖最后由 6091820503 于 2014-7-29 13:58 编辑

最近在学习libusb-win32，因此拿STM32F4写了个下位机，然后和上位机一起进行测试
这个是HID的测试程序，上位机和下位机都测试通过

通信测试.png (22.98 KB, 下载次数: 0) 下载附件通信测试通过 2014-7-29 13:55 上传

libusb-win32的安装调试过程，后面会补充

HID_pc_demo.rar (5.01 MB, 下载次数: 388) 2014-7-29 13:54 上传点击文件名下载附件
HID_PC_DEMO

HID_demo.rar (46.25 KB, 下载次数: 291) 2014-7-29 13:54 上传点击文件名下载附件
HID_STM32_DEMO

//STM32主程序，非常的简答

int main(void)
{
uint8_t buf[16] = {0,1,2,3};
RCC_ClocksTypeDef RCC_Clocks;
/* SysTick end of count event each 10ms */
RCC_GetClocksFreq(&RCC_Clocks);
SysTick_Config(RCC_Clocks.HCLK_Frequency / 100);
//ÅäÖÃUSB HID
USBD_Init(&USB_OTG_dev,
USB_OTG_FS_CORE_ID,
&USR_desc,
&USBD_HID_cb,
&USR_cb);
while(1)
{
Delay(1);
buf[0]++;
USBD_HID_SendReport (&USB_OTG_dev, buf, 4);
}
}

复制代码

//PC端程序也是非常的简单

#include <stdio.h>
#include <string.h>
#include <iostream>
#include "conio.h"
#include "lusb0_usb.h"
#define m_dev_VENDOR 0x0483 /* Vendor ID of the m_dev */
#define m_dev_PRODUCT 0x5710 /* Product ID of the m_dev */
#define m_dev_DATA_SIZE 4 /* Number of bytes to get at once */
int main(int argc, char *argv[])
{
int ret, i;
char data[m_dev_DATA_SIZE] = {0};
struct usb_bus *bus;
struct usb_device * m_dev = NULL;
struct usb_dev_handle *m_dev_handle;
char str[64];
usb_init();
ret = usb_find_busses();
if(ret<0)
{
printf("usb_find_busses failed - returned: %i ", ret);
return ret;
}
ret = usb_find_devices();
if(ret<0)
{
printf("usb_find_devices failed - returned: %i ", ret);
return ret;
}
for(bus = usb_get_busses(); bus; bus = bus->next)
{
struct usb_device *dev;
for(dev = bus->devices; dev; dev = dev->next)
{
if(dev->descriptor.idVendor == m_dev_VENDOR && dev->descriptor.idProduct == m_dev_PRODUCT)
m_dev=dev;
}
}
if(!m_dev)
{
printf("m_dev not found ");
return 1;
}
m_dev_handle = usb_open(m_dev);
if(!m_dev_handle)
{
printf("Could not open m_dev ");
return 1;
}
printf("m_dev opened: %s ", m_dev->filename);
printf("Device Protocol : %d ",m_dev->descriptor.bDeviceProtocol);
printf("Report Length : %d ",m_dev->descriptor.bLength);
printf("Decriptor Type : %d ",m_dev->descriptor.bDescriptorType);
printf("End Points : %d ",m_dev->config->interface->altsetting->bNumEndpoints);
printf("Interface Class : %d ",m_dev->config->interface->altsetting->bInterfaceClass);
printf("Protocol : %d ",m_dev->config->interface->altsetting->bInterfaceProtocol);
printf("Interface Number: %d ",m_dev->config->interface->altsetting->bInterfaceNumber);
printf("Device Filename : %s ",m_dev->filename);
usb_get_string_simple(m_dev_handle, m_dev->descriptor.iManufacturer, str, sizeof(str));
printf("Device Manfucaturer : %s ",str);
usb_get_string_simple(m_dev_handle,m_dev->descriptor.iProduct,str,sizeof(str));
printf("Product Name : %s ",str);
usb_get_string_simple(m_dev_handle,m_dev->descriptor.iSerialNumber,str,sizeof(str));
printf("Device Serial Number: %s ",str);
printf("End point addresses : 0x%x ",m_dev->config->interface->altsetting->endpoint->bEndpointAddress);
//return 0;
if(usb_set_configuration(m_dev_handle, 1) < 0)
{
printf("Could not set configuration ");
usb_close(m_dev_handle);
return 1;
}
if(usb_claim_interface(m_dev_handle, 0) < 0) //claim_interface 0指向第一个设备
{
printf("Could not claim interface ");
usb_close(m_dev_handle);
return 1;
}
while(1)
{
ret = usb_interrupt_read(m_dev_handle, 0x81, data, m_dev_DATA_SIZE, 0);
//ret = usb_bulk_read(m_dev_handle, 0x81, data, m_dev_DATA_SIZE, 0);
printf("ret: %i: ", ret);
for(i = 0; i< ret; i++)
{
printf("%hhd ", (unsigned char)(data[i]));
}
printf(" ");
}
usb_release_interface(m_dev_handle, 0);
usb_close(m_dev_handle);
printf("m_dev closed ");
return 0;
}