定时器2的寄存器值全为0-第2页回答

定时器2的寄存器值全为0

2019-07-14 13:21发布

型号为103系列,将PA0和PA1作为编码器的两个输入通道(定时器通道1和通道2), 配置代码如下:

GPIO_InitTypeDef          GPIO_InitStructure;
tiM_TimeBaseInitTypeDef    TIM_TimeBaseStructure;
TIM_ICInitTypeDef          TIM_ICInitStructure;
NVIC_InitTypeDef             NVIC_InitStructure;

RCC_APB2PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE); //使能TIM2时钟
/* Enable GPIOA, clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); //使能GPIOA时钟

GPIO_StructInit(&GPIO_InitStructure);//将GPIO_InitStruct中的参数按缺省值输入
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
GPIO_InitStructure.GPIO_Mode  = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);

NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);

TIM_DeInit(TIM2);
TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
TIM_TimeBaseStructure.TIM_Period = 360 * 4 -1;  //设定计数器重装值
TIM_TimeBaseStructure.TIM_Prescaler = 0;       //TIM2时钟预分频值
TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1 ;//设置时钟分割 T_dts = T_ck_int
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; //TIM向上计数
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

TIM_EncoderInterfaceConfig(TIM2, TIM_EncoderMode_TI12, TIM_ICPolarity_BothEdge ,TIM_ICPolarity_BothEdge);//使用编码器模式3，上升下降都计数
TIM_ICStructInit(&TIM_ICInitStructure);       //将结构体中的内容缺省输入

TIM_ICInitStructure.TIM_ICFilter = 6;       //选择输入比较滤波器
TIM_ICInit(TIM2, &TIM_ICInitStructure);       //将TIM_ICInitStructure中的指定参数初始化TIM2

TIM_ClearFlag(TIM2, TIM_FLAG_Update);       //清除TIM2的更新标志位
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE); //运行更新中断
//Reset counter
TIM2->CNT = 0;

TIM_Cmd(TIM2, ENABLE); //启动TIM2定时器

结果是定时器2的寄存器值全为0,  定时器2也无法开启,  单独将定时器2作为普通定时器用则正常, 求帮忙找下原因啊

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。