求LCD12864的串行例程 - 平头弟

求LCD12864的串行例程

2019-07-15 18:59发布

站内问答 / 51单片机

12662 4

本人想l利用MSP430单片机做LCD12864的显示，跪求各位大神帮忙，小弟感激不尽啊~！！

友情提示: 此问题已得到解决，问题已经关闭,关闭后问题禁止继续编辑，回答。

该问题目前已经被作者或者管理员关闭, 无法添加新回复

4条回答

1楼-- · 2019-07-15 19:40

/********************************************************************
* 文件名  ：定时器的使用.c
* 描述 :
* 创建人  ：东流，2009年4月8日
* 版本号  ： 2.0
***********************************************************************/
#include <reg52.h>
#include <string.h>

#define uchar unsigned char
#define uint  unsigned int

uchar code IC_DAT[];
uchar code pic1[];
uchar code pic2[];
uchar code pic3[];

sbit RS  = P0^7;
sbit WRD = P0^6;
sbit E = P0^5;
sbit PSB = P0^4;
sbit RES = P0^3;

void TransferData(char data1,bit DI);
void display(void);
void display_grapic(void);
void delayms(uint n);
void DisplayLine(uchar line1,uchar line2);
void DisplayGraphic(uchar code *adder);
void delay(uint m);
void lcd_mesg(uchar code *adder1);

uchar code IC_DAT[]={
"    HOT-51    "
"             "
"  单片机开发板  "
" 雁凌电子 "
};

uchar code IC_DAT2[]={
"  白日依山尽，  " //0x80
"  欲穷千里目，  " //0x90
"  黄河入海流。  " //0x88
"  更上一层楼。  " //0x98
};

/********************************************************************
* 名称 : Convert(uchar In_Date)
* 功能 : 因为电路设计时，P0.0--P0.7接法刚好了资料中的相反，所以设计该函数。
* 输入 : 1602资料上的值
* 输出 : 送到1602的值
***********************************************************************/
unsigned char Convert(unsigned char In_Date)
{
unsigned char i, Out_Date = 0, temp = 0;
for(i=0; i<8; i++)
{
      //temp = (In_Date >> i) & 0x01;
      //Out_Date |= (temp << (7 - i));
Out_Date=  In_Date;

}
return Out_Date;
}

void initinal(void)          //LCD字库初始化程序
{
         delay(40);          //大于40MS的延时程序
         PSB=1;                //设置为8BIT并口工作模式
         delay(1);             //延时
         RES=0;                //复位
         delay(1);             //延时
         RES=1;                //复位置高
         delay(10);
         TransferData(0x30,0);  //Extended Function Set :8BIT设置,RE=0: basic instruction set, G=0 :graphic display OFF
         delay(100);          //大于100uS的延时程序
         TransferData(0x30,0);  //Function Set
         delay(37);          ////大于37uS的延时程序
         TransferData(0x08,0);  //Display on Control
         delay(100);          //大于100uS的延时程序
         TransferData(0x10,0);  //Cursor Display Control光标设置
         delay(100);          //大于100uS的延时程序
         TransferData(0x0C,0);  //Display Control,D=1,显示开
         delay(100);          //大于100uS的延时程序
         TransferData(0x01,0);  //Display Clear
         delay(10);          //大于10mS的延时程序
         TransferData(0x06,0);  //Enry Mode Set,光标从右向左加1位移动
         delay(100);          //大于100uS的延时程序
      }

/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void    initina2(void)          //LCD显示图片(扩展)初始化程序
      {
         delay(40);          //大于40MS的延时程序
         PSB=1;                //设置为8BIT并口工作模式
         delay(1);             //延时
         RES=0;                //复位
         delay(1);             //延时
         RES=1;                //复位置高
         delay(10);

         TransferData(0x36,0);  //Extended Function Set RE=1: extended instruction
         delay(100);          //大于100uS的延时程序
         TransferData(0x36,0);  //Extended Function Set:RE=1: extended instruction set
         delay(37);          ////大于37uS的延时程序
         TransferData(0x3E,0);  //EXFUNCTION(DL=8BITS,RE=1,G=1)
         delay(100);          //大于100uS的延时程序
         TransferData(0x01,0);  //CLEAR SCREEN
         delay(100);          //大于100uS的延时程序
      }

/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void main(void)
   {
      while(1)
      {
   initina2();          //调用LCD显示图片(扩展)初始化程序

      DisplayGraphic(pic2);  //显示图片2
      delayms(200);

      initinal();       //调用LCD字库初始化程序
      delay(100);          //大于100uS的延时程序
      lcd_mesg(IC_DAT);    //显示中文汉字1
      delayms(240);
      delayms(240);

      initinal();       //调用LCD字库初始化程序
      delay(100);          //大于100uS的延时程序
      lcd_mesg(IC_DAT2);    //显示中文汉字2
      delayms(240);
   delayms(240);
   initinal();
      }
   }

/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void lcd_mesg(unsigned char code *adder1)
{
unsigned char i;
      TransferData(0x80,0);  //Set Graphic Display RAM Address
      delay(100);
for(i=0;i<32;i++)
{
      TransferData(*adder1,1);
   adder1++;
}

      TransferData(0x90,0);  //Set Graphic Display RAM Address
      delay(100);
for(i=32;i<64;i++)
{
      TransferData(*adder1,1);
   adder1++;
}
}

/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void TransferData(char data1,bit DI)  //传送数据或者命令,当DI=0是,传送命令,当DI=1,传送数据.
      {
         WRD=0;
         RS=DI;
         delay(1);
         P2=Convert(data1);
         E=1;
         delay(1);
         E=0;
         }

/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void delayms(unsigned int n)          //延时10×n毫秒程序
               {
                  unsigned int i,j;
                  for(i=0;i<n;i++)
                     for(j=0;j<2000;j++);
               }

/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void delay(unsigned int m)          //延时程序
               {
                  unsigned int i,j;
                  for(i=0;i<m;i++)
                     for(j=0;j<10;j++);
               }

/********************************************************************
* 名称 : Main()
* 功能 : 主函数
* 输入 : 无
* 输出 : 无
***********************************************************************/
void DisplayGraphic(unsigned char code *adder)
{

int i,j;
//*******显示上半屏内容设置
for(i=0;i<32;i++)             //
{
   TransferData((0x80 + i),0); //SET  垂直地址 VERTICAL ADD
   TransferData(0x80,0);    //SET  水平地址 HORIZONTAL ADD
   for(j=0;j<16;j++)
   {
      TransferData(*adder,1);
      adder++;
   }
}
//*******显示下半屏内容设置
for(i=0;i<32;i++)             //
{
   TransferData((0x80 + i),0); //SET 垂直地址 VERTICAL ADD
   TransferData(0x88,0);    //SET 水平地址 HORIZONTAL ADD
   for(j=0;j<16;j++)
   {
      TransferData(*adder,1);
      adder++;
   }
}
}

unsigned char code pic2[]=
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x07,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x01,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x78,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x07,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x00,0x01,0xC0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x70,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x00,0x1C,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x1E,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x00,0x00,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x01,0xE6,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x00,0x07,0x82,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x1E,0x02,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0xE0,0x00,0x00,0x00,0x00,0x78,0x03,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0xE0,0x00,0x00,0x00,0x01,0xE0,0x03,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x78,0x00,0x00,0x00,0x07,0x80,0x01,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x03,0x1E,0x00,0x00,0x00,0x1E,0x00,0x07,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x03,0x07,0x80,0x00,0x00,0x78,0x00,0x1F,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x02,0x01,0xE0,0x00,0x01,0xE0,0x00,0x3F,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x06,0x00,0x78,0x1F,0x07,0x80,0x01,0xF1,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0E,0x00,0x1E,0x3F,0x9E,0x00,0x03,0xF9,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0E,0x00,0x07,0xB3,0x78,0x00,0x0F,0xF9,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0x80,0x01,0xFF,0xE0,0x00,0x79,0x98,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0xE0,0x00,0x7F,0x80,0x00,0xE0,0xD8,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0xF8,0x00,0x0C,0x00,0x07,0xE0,0xF8,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0E,0x7E,0x00,0x0C,0x00,0x1F,0xF0,0xF8,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0E,0x1F,0x80,0x0C,0x00,0x7E,0x70,0xDC,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0x07,0xE0,0x0C,0x01,0xE3,0x70,0x5C,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0x81,0xF8,0x0C,0x07,0x83,0x70,0x5F,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0D,0xE0,0x7E,0x0C,0x1F,0xC1,0xF0,0x5F,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0x78,0x3F,0x8C,0x7F,0xC1,0xB8,0x47,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0F,0x1E,0x0F,0xED,0xEC,0xE1,0xB8,0xC7,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x07,0x83,0xFF,0xC6,0xE1,0xB9,0xC7,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x07,0xE0,0xFF,0xE7,0xE1,0xBF,0x07,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x07,0xF8,0x3F,0xE7,0xE1,0xBF,0x07,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x07,0x9E,0x0C,0xE6,0xE1,0x8F,0x07,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x07,0x87,0x8C,0xE6,0xE3,0x8F,0x83,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x0F,0x81,0xED,0xE6,0xE7,0x0F,0x83,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x07,0x00,0x7F,0xE6,0xFE,0x0F,0x83,0x40,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1F,0x00,0x00,0x1E,0x76,0xFE,0x0F,0x83,0x40,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1E,0x00,0x00,0x00,0x72,0x1E,0x0F,0x83,0x40,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1E,0x00,0x00,0x00,0x7E,0x1A,0x0F,0x83,0x40,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x1E,0x00,0x00,0x00,0x7C,0x1A,0x0F,0x83,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x0C,0x00,0x00,0x00,0x78,0x1A,0x0F,0x83,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x1A,0x07,0x83,0xC0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x1E,0x07,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x1F,0x07,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x1F,0x07,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x1F,0x07,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x1F,0x07,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x1F,0x00,0x00,0x00,0x00,0x08,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x1F,0x00,0x00,0x00,0x00,0x10,0x00,0x40,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x1F,0x00,0x00,0x00,0x00,0xFF,0x08,0x20,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x1F,0x00,0x00,0x00,0x00,0x28,0x05,0xFC,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x34,0x0C,0x00,0x00,0x00,0x00,0x48,0x00,0x40,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x34,0x00,0x00,0x00,0x00,0x00,0xFF,0x08,0x88,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x34,0x00,0x00,0x00,0x00,0x00,0x08,0x05,0xFC,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x00,0x00,0x4A,0x00,0xA8,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x00,0x00,0x89,0x04,0xA8,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x08,0x88,0xA8,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x10,0xAA,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x01,0x2E,

};

2楼-- · 2019-07-15 19:44

你试试这个lcd 12864液晶测试程序，再不行的话，看LCD12864的例程

3楼-- · 2019-07-15 23:54

非常感谢！！我已经调试出来了。。再次感谢！！！

4楼-- · 2019-07-16 01:07

呆呆1991 发表于 2014-7-29 23:16
你试试这个lcd 12864液晶测试程序，再不行的话，看LCD12864的例程

非常感谢！！我已经调试出来了。。再次感谢！！！

一周热门更多>

相关问题

相关文章