9B96屏幕怎么改变显示方向啊

2019-03-24 14:19发布

9B96屏幕怎么改变上下显示方向啊 此帖出自小平头技术问答
友情提示: 此问题已得到解决,问题已经关闭,关闭后问题禁止继续编辑,回答。
该问题目前已经被作者或者管理员关闭, 无法添加新回复
3条回答
Study_Stellaris
1楼-- · 2019-03-24 19:52
 精彩回答 2  元偷偷看……
wzp2007
2楼-- · 2019-03-25 00:25
< :TI_MSP430_内容页_SA7 --> 修改驱动上面的一个宏定义就OK了
jxndcl301
3楼-- · 2019-03-25 04:41
在drivers/kitronix320x240x16_ssd2119_8bit.c中修改如下的宏,就可以改变显示的方向了。
//*****************************************************************************
//
// This driver operates in four different screen orientations. They are:
//
// * Portrait - The screen is taller than it is wide, and the flex connector is
// on the left of the display. This is selected by defining
// PORTRAIT.
//
// * Landscape - The screen is wider than it is tall, and the flex connector is
// on the bottom of the display. This is selected by defining
// LANDSCAPE.
//
// * Portrait flip - The screen is taller than it is wide, and the flex
// connector is on the right of the display. This is
// selected by defining PORTRAIT_FLIP.
//
// * Landscape flip - The screen is wider than it is tall, and the flex
// connector is on the top of the display. This is
// selected by defining LANDSCAPE_FLIP.
//
// These can also be imagined in terms of screen rotation; if portrait mode is
// 0 degrees of screen rotation, landscape is 90 degrees of counter-clockwise
// rotation, portrait flip is 180 degrees of rotation, and landscape flip is
// 270 degress of counter-clockwise rotation.
//
// If no screen orientation is selected, "landscape flip" mode will be used.
//
//*****************************************************************************
#if ! defined(PORTRAIT) && ! defined(PORTRAIT_FLIP) &&
! defined(LANDSCAPE) && ! defined(LANDSCAPE_FLIP)
#define LANDSCAPE_FLIP
#endif

一周热门 更多>

相关问题

    相关文章